/
Stiffener Draw Mode

Stiffener Draw Mode

Owned by 이혜연 (Unlicensed)
Last updated: Jul 05, 2022
1 min read

Summary

  • Enter Stiffener Draw Mode to draw the Stiffener in a plane.

 

How to Run

  • Ribbon Menu > [Model] Tab > [Component] Group > Stiffener > Draw

 

Explanation

Enter Stiffener Draw Mode

Select the target member and plane to enter Stiffener Draw Mode.

  • [Select Target Member]
    Select the object on which to place the stiffener. Unlike rebars, multiple choices are possible.

  • [Define Draw Plane]
    Defines the reference plane on which the stiffener will be placed.

Define Plane

  • [Target Option]
    Select the type of object on which to place the stiffener.

  • Create from Original Object : Create a plane from the original object of the target member and enter Draw Mode, and the stiffener is created on the original object of the target member.

  • Create from Result Object : Create a plane for the target member's application object and enter Draw Mode. The stiffener is created for the target member's application object.

Depending on the application of the Cutting Property function, the member has the original object and the result object.

  • [View Range]
    Defines the front and rear visible ranges of the defined Draw Plane.

 

Reference Materials

 

Related content

Stiffener (Array)
Stiffener (Array)
Manual (MIDAS CIM)
More like this
Stiffener Draw Mode
Stiffener Draw Mode
매뉴얼 (MIDAS CIM)
More like this
Stiffener > Draw
Stiffener > Draw
Manual (midas CIM) 구버전/사용X
More like this
Stiffener Property
Stiffener Property
Manual (MIDAS CIM)
More like this
Stiffener > Array
Stiffener > Array
Manual (midas CIM) 구버전/사용X
More like this
Closed Stiffener
Closed Stiffener
Manual (MIDAS CIM)
More like this