Draw Stiffener : Select the stiffener to array.

Array Stiffener : Select Array Stiffener and modify it.

All : Select all stiffeners with no distinction.

Array along path : Stiffeners are arranged along the Array path.

Tapered array : Sectioning the shape of the target member along the array path and stiffeners are tapered.

By select : Select a specific face.

Select stiffener plane : Trans already arrayed. Defines the plane of the selected stiffener among the stiffeners.

3 points : Pick three points to define the plane.

By offset : Defines the plane away from the Normal direction by the Offset value entered from the plane selected by the Select stiffener.

Curve normal : Click on any point on the edge of the member to define the edge and normal plane at the clicked position.

Geometric line of 1D member : Apply the geometric line of the target member as the baseline of the gap.

Select edge : Applies the edge of the object selected on the screen as the baseline of the gap.

User defined : Enter the desired interval value format.

Adjustable spacing : After inputting the target stiffener spacing, the stiffener spacing should be appropriately distributed at the start, end and center of the spare spacing.

By number : Array Specifies the number of stiffeners to place in the bin.

Limit max. spacing : Based on the spacing value of the stiffener you are aiming for, calculate the number to arrange and rearrange the number evenly. (User input interval value ≥ actual interval value).

Pattern spacing : Enter the stiffener spacing you want to target.