Stiffener Slot-Split

Owned by 이혜연 (Unlicensed)
Last updated: Jul 06, 2022
2 min read

Summary

  • Create a slot/split to avoid interfering with each other at the intersection of the Stiffener.

 

How to Run

  • Ribbon Menu > [Model] Tab > [Component] Group > Stiffener > Slot-Split

 

Explanation

Create Slot-Split

Create a slot/split to avoid interfering with each other at the intersection of the Stiffener.

  • [Select Target]
    Select the stiffener to be the target of the slot-split.

    • Section Type : The section type of the selected stiffener is output.

  • [Select Tool]
    Select the stiffener to be the tool for the slot-split.

    • Section Type : The section type of the selected stiffener is output.

  • [Slot & Split]
    Enter the shape information for the slot-split.

    • Type : Select the type of slot-split.

  • The Slot/Split created by the Slot/Split function is stored as the property information of the Target Stiffener. (Editable)

  • The type of Slot-Split Type that can be selected varies depending on the Target / Tool Stiffener height.

  • The type of Slot-Split Type that can be selected varies depending on the Target / Tool Stiffener selection.

Target
Tool
Slot-Split Type
Target
Tool
Slot-Split Type
Flat
Flat
Type 1 (Flat)
Type 2 (Flat)
Type 3 (Flat)
Flat
T-Section
Type 1 (T-Section)
Type 2 (T-Section)
Type 3 (T-Section)
Flat / Angle / T-Section
Angle
Type 1 (Angle)
Flat / Angle / T-Section
I-Section
Type 1 (I-Section)
Type 2 (I-Section)
Flat / Angle / T-Section
U-Section
Type 1 (U-Section)

 

Reference Materials

  • Link to Reference Materials