[Drafter] How to Create 3D PDF Drawings
- 이혜연 (Unlicensed)
- 최규완(Eric)
Summary | Can I make 3D PDF drawings? |
|---|---|
Related Function | [Drafter] CAD View |
Type | Tip, Example |
Drafter utilizes the 3D PDF creation function to include the 3D model in a PDF file through the general output function.
Based on the 2D section created in Drafter, you can combine it with the 3D section, and check the model with the PDF viewing function that is pre-installed on your PC.
Figure. 1 Drafter-created section (2D, 3D)
Figure.1
▶ This is a cross section in which CIM and Drafter are linked for drawing.
To check the function, 2D section and 3D section in the form of isometric view must be created in Drafter in advance.
Figure. 2 Execute function
Figure. 2
▶ Execute 3D PDF Settings in Drawing Creation Tool in CIM View mode .
Figure. 3 Funtion Use Procedures
Figure. 3
▶ In the explanation example), the model of the pier is used.
① Select a representative section to be included in the 3D View list.
② Select the 2D View section to be displayed in combination with the 3D section.
③ Move the 2D section to be combined with the 3D section to the Assigned 2D View list.
Figure. 4 Check the settings of the 3D section
Figure. 5 Composition of drawing (general drawing)
Figure. 6 Drawing output
Figure. 7 Save the file
Figure. 8 Check PDF files