[Drafter] How to Create a 3D Drawing (General Section)
- 이혜연 (Unlicensed)
- 최규완(Eric)
Summary | I want to make a 3D section for general view using ISO View. |
|---|---|
Related Function | [Drafter] CAD View |
Type | Tip, Example |
Using the Named View function of CIM, you can create a 3D section in the form of an isometric view (ISO View).
In addition, you can create customized drawings for general drawing use for drawing artifacts.
Based on the example in the following explanation), based on the section created in Drafter, add the title, dimension line, symbol, etc. of the drawing to make the drawing.
Figure. 1 Copy of one-sided
Figure.1
▶ Select the section to be used in CIM View.
(If you double-click the section name in the CIM View - Work Tree window, the section is selected and zoomed in.)
▶ For example, to create a drawing for general drawing and reinforcement drawing using the same section, two sections are copied.
In (Example of explanation), two sections other than the original section were copied.)
Figure. 2 Rename section
Figure.2
▶ You can change the name of the copied section according to the purpose of the drawing.
(The name can be changed only in the copied section, and the name of the original section created from CIM can be changed in CIM.)
Figure. 3 Classification of use of drawings
Figure.3
▶ Names are classified according to the purpose of the drawing.
In the example of explanation), the names of general drawings and reinforcing diagrams have been separated and changed.
Figure. 4 Section construction
Figure. 5 Apply Style and Scale changes
Figure. 6 Apply changes Update
Figure. 7 2.5D Dimension line command (ISO View applied dimension line)
Figure. 8 Dimension line input method (1)
Figure. 9 Dimension line input method (2)
Figure. 10 Dimension line input section
Figure. 11 Construction of drawing (add general view section)