[Drafter] Style Setting (Drawing Style Manager)

You can select, apply, and change the 5 integrated style managers supported by Drafter.

It is registered as a style style suitable for the domestic civil engineering structure general drawing and arrangement drawing style.

You can set the dimension line, symbol, line color, etc. according to your environment.

The result of applying the style is set to be suitable for midas Drafter.ctb in Plot table Style when printing a drawing.

Drafter_Style S01 (General Drawing None Hatch) – This configuration is applicable to the general drawing style.

Drafter_Style S02 (General Drawing With Hatch) – It is configured to apply a Solid Hatch when interlocking a 2D section of a general drawing.

Drafter_Style S03 (Rebar Drawing None Hatch) – This is a configuration applicable to the rebar drawing style.

Drafter_Style S04 (Rebar Drawing With Hatch) – It is configured to apply Solid Hatch to reinforcement lines.

Drafter_Style S05 (ISO Rebar) – It is a configuration applicable to the backing view isometric view (ISO View).

This is a list that forms the main composition when applying the reinforced concrete structure drawing style.

Dimension and Annotation

(Define the form of the dimension line and the annotation style of the reinforcement.)

Object Style

(Defines the notation method related to concrete and reinforcing bars.)

Manages concrete and rebar line marks, line styles, hatches, etc. in the visible range.

It has a configuration that allows you to apply and change the form of dimension lines.

As for the basic setting contents, the dimension line is applied with a red line composition and a point arrow tip, and the text is a 1:1 standard 3 size embossed text.

It is set.