[Drafter] How to Create a Sheet
- 이혜연 (Unlicensed)
- 최규완(Eric)
Summary | How should I use the client's dogak? |
|---|---|
Related Function | [Drafter] CAD View (CAD Mode) > Sheet |
Type | Tip, Example |
This is the content to define so that it can be used by registering different angles for each client, and setting it to make it easy to change the scale.
Using the drawing requires moving to CAD View Drawing (CAD mode) model space.
Figure. 1 CAD View Model Space Switch Window
Figure.1
▶ Move from Drafter CIM View model space to CAD View Drawing model space.
▶ To move , double-click the cDrawing1 part of the CAD View - Work Tree window or right-click the mouse to switch the model space.
Figure. 2 CAD Drawing environment configuration conversion
Figure.2
▶ When converted to CAD View Drawing model space, the CIM Drawing Tree window used in CIM View is deactivated, and the CAD-based environment
The available functions are activated.
The following example shows how to insert a sword into a drawing and include information.
.
Figure. 3 How to call up an incantation
Figure. 3
▶ Drag & drop the pre-designated angle to the CAD window to bring it up.
▶ Note that the angle to be used should be set on a 1:1 basis in order to use it according to the scale desired by the user.
Figure. 4 Degree angle setting
Figure. 5 How to set the angle
Figure. 6 How to reset the area of 6 degrees
Figure. 7 Degree angle scale setting conversion