/
Chamfer Shape

Chamfer Shape

Owned by 이혜연 (Unlicensed)
Last updated: Jul 01, 2022
2 min read

Summary

Apply a fillet or chamfer to the edge of a 1D, 2D Member or a 3D Body.

 

How to Run

  • Ribbon Menu > [Edit] Tab > [Edit Shape] Group > Chamfer

 

Explanation

Fillet Feature

This feature applies a fillet to the edge of a solid.

  • [Blend Type]
    Select fillet.

  • [Select Edge]
    Select the edge to apply the fillet.

  • [Fillet Radius]
    Enter the length of the arc radius for the fillet.

 

 

Chamfer Feature

This feature applies a chamfer to the edge of a solid.

[Tab] Generate

  • [Blend Type]
    Select chamfer..

  • [Select Edge]
    Select the edge to apply the chamfer.

  • [Fillet Radius]
    Enter the length of the arc radius for the chamfer.

 

  • By Gizmo distance, By face offset Method

Set how the entered length is applied.

 

  • One Direction, Two Direction Method

Set whether the length in both directions is entered as one unit or in two separate units.

 

 

If the Two Direction Method is selected, By Face Offset Method is applied to the length as the By Gizmo Distance Method.

Reference Materials

 

Related content

Using a 2D/3D Edit Chamfer
Using a 2D/3D Edit Chamfer
FAQ
More like this
Chamfer Edge
Chamfer Edge
Manual (MIDAS CIM)
More like this
Chamfer Shape
Chamfer Shape
매뉴얼 (MIDAS CIM)
More like this
Chamfer
Chamfer
Manual (midas CIM) 구버전/사용X
More like this
Using a 1D Edit Chamfer
Using a 1D Edit Chamfer
FAQ
More like this
JP_Chamfer Shape　形状の面取り
JP_Chamfer Shape　形状の面取り
JP-CIMマニュアル
More like this