Shear Reinforcement Property

Owned by 이혜연 (Unlicensed)
Last updated: May 03, 2023 by 안종건 (Deactivated)
4 min read

Summary

  • View or edit property information for classification, geometry, analysis, quantity settings of the Shear Reinforcement Group.

 

How to Run

  • Select the Shear Reinforcement Group on the screen.

 

Explanation

Common Tab

 

 

  • [Classification]
    Set the classification properties of the rebar group.

    • Name : Enter the name of the rebar group.

    • Rebar Type : Displays the rebar type.

    • Grade : Sets the material grade of the rebar group.

  • [Specification]
    Sets the specification of the rebar group.

    • Code : Sets the rebar specification.

    • Diameter : Select the rebar diameter. This is enabled only when a code is selected.

    • Nominal Diameter : Enter the nominal diameter of the rebar.

    • Bending Radius : : Enter the bending radius of the rebar.

    • Maximum Length : Displays the length of the longest rebar within the rebar group.

    • Minimum Length : Displays the length of the shortest rebar within the rebar group.

  • Diameter : This is enabled only when a ‘Code’ is selected.

  • Nominal Diameter : ‘Once the ‘Diameter’ is set, the nominal diameter is displayed. This can be entered manually only when ‘Code : None’.

  • Bending Radius : Once the ‘Diameter’ is set, the bending radius is displayed. This can also be input manually.

Rebar Specification

  • [Cover Thickness]
    Sets the cover property that adjusts the position of the rebar group in the member.

    • From Start/End Plane : Enter the rebar cover thickness from the start and end planes.

    • From Plane Cover Align Center : Sets the criteria for ‘From Plane’.

  • [Offset]
    Adjust the extension length at both ends of the rebar.

    • Start/End Length : Enter the extension length at the start and end of the rebar. Enter a positive (+) value to shorten, and a negative (-) value to extend.

  • [Hook]
    Set the shape of a hook.

    • Differenct Start/End Hook : Set whether to apply hook settings differently to the start and end point of the hook.

    • Hook Type : Select the type of hook.

    • Angle : Enter the angle of the hook.

    • Length : Enter the length of the hook.

  • Differenct Start/End Hook

    • Off : Applies same hook settings to start and end point of the hook.

    • On : Applies different hook settings to start and end point of the hook. This enables the Start/End Point Tab button.

  • Hook Type : Select the hook type based on the angle.

    • No Hook : The hook is not created.

    • Custom Hook : The hook is created based on the hook angle entered by the user.

    • ±180°, ±135°, ±90° : The hook is created according to the information specified in ‘Rebar
      Specification’. For this setting, the angle/radius/length cannot be set manually.

 

Array Tab

 

  • [Arrangement]
    Sets the spacing for the stirrup rebar.

    • Longitudinal : Sets the longitudinal spacing of the stirrup rebar.

    • Transverse : Sets the transverse spacing of the stirrup rebar.

      • Tolerance : Enter the tolerance for the transverse arrangement. The stirrup rebar is arranged in the transverse direction based on the user-defined spacing and tolerance.

  • Adjustable Spacing : Arrange the rebars using the entered spacing.

    • First Spacing : Arrange the rebars using the entered spacing, and then adjust from the first spacing.

    • Last Spacing : Arrange the rebars using the entered spacing, and then adjust from the last spacing.

    • Middle Spacing : Arrange the rebars using the entered spacing, and then adjust from the middle spacing.

    • First/Last Spacing : Arrange the rebars using the entered spacing, and then adjust base on equidistant spacing between the first and last spacing.

  • Number of Rebars : Arrage the rebars using the number of rebars entered.

  • Uniform Max. Spacing : Arrage the rebars at equal spacing.

  • Pattern Spacing : Arrange according to the entered spacing. Do not arrange for any remaining values less than the entered spacing.

  • User Defined : Arrange the rebars using user-defined spacing.

    • Ex)  3@200, 400, 5@150

  • None : Create a single stirrup rebar without spacing.

  • Pattern Spacing : Arrange according to user-defined spacing.

  • Number & Spacing : Enter the number of stirrup rebars and spacing to arrange them.

  • [Actual Spacing]
    Displays the actual spacing used to arrange the rebars.

  • [Variable Rebar Name]
    Sets the name rule within the rebar group.

    • Array Group : Set the name of each arranged rebar differently.

 

Construction Tab

 

Reference Materials