Independent Longitudinal Rebar
- 이혜연 (Unlicensed)
Summary
Draws (defines) an Independent Longitudinal Rebar on the Draw Plane.
How to Run
[Rebar Draw Mode]
Ribbon Menu > [Rebar Draw] Tab > [Rebar] Group > Draw
Explanation
Free Shape Method
Create an independent longitudinal rebar using the Free Shape method.
[Tab] Draw
[Rebar Type]
Select the type and method of rebars to be drawn.Select the Independent Longitudinal Rebar.
Select Free Shape.
[Draw Rebar]
Use the Sketch tool to plot the line on which the longitudinal rebars are created.Reverse Direction : Apply the position of the rebar in the opposite direction relative to the edge.
[Tab] Property
Select Line Method
Create an independent longitudinal rebar using the Select Line method.
[Tab] Draw
[Rebar Type]
Select the type and method of rebars to be constructed.Select the Independent Longitudinal Rebar.
Choose Select Line.
[Draw Rebar]
Position the longitudinal rebar by selecting the pre-drawn line as a virtual draw line (Hidden Line).Mirror Hook : Switch the start and end points of the longitudinal rebar profile.
Reverse Direction : Apply the position of the rebar in the opposite direction relative to the edge.
[Tab] Property
Select Member Edge Method
Create a transverse rebar using the Select Member Edge method.
[Tab] Draw
[Rebar Type]
Select the type and method of rebars to be constructed.Select the Independent Longitudinal Rebar.
Choose Select Member Edge.
[Draw Rebar]
Select the Edge of the Target Member section.
When selecting an Edge, the direction and position of the rebar must be set together.
If an intersection exists between edges (including an extended intersection), create a connecting Hidden Line.
[Tab] Property