Sketch
Summary
Create a point and a line body object for sketch.
How to Run
Ribbon Menu > [Feature] Tab > [Sketch] Group > Sketch
Explanation
Point(Single Point)
This function selects a point and creates a point object at that location.
[Sketch]
Select a point and creates a point object at that location.
Point(Center of Points)
This function creates point objects at multiple point locations.
[Sketch]
Select multiple points and create point objects at those location.
Line(2 Points)
This function selects two points and creates a straight wire object that connects those two points.
[Sketch]
Select the start and end points to create a straight line that connects those two points.
Click tab to manually input the length.
Arc(3 Points)
This function selects three points to create a wire arc object that passes through those three points.
[Sketch]
Select the start, middle and end point in order to create an arc that passes through those three points.
Click tab to manually input the length.
Arc(2 Points + Angle)
This function enters two points and an angle to create a wire arc object.
[Sketch]
Select the start point, end point and angle in order to create an arc.
Click tab to manually input the length.
Arc(2 Points + Radius)
This function enters two points and a radius to create a wire arc object.
[Sketch]
Select the start point, end point and radius in order to create an arc.
Arc(Center Point)
This function enters the center point, start point and end point to create a wire arc object.
[Sketch]
Select the center point, start point and end point in order to create an arc.
Arc(Tangent)
This function enters the reference line, start point and end point to create a wire arc object.
[Sketch]
Select the reference line, start point and end point in order to create an arc.
Semi-Ellipse
Select the reference line, start point and end point in order to create an arc.
[Sketch]
Select both ends of an axis and one end of the other axis to create a semi-ellipse.
Rectangle(Center Point 1)
This function enters a center point and a vertex to create a wire rectangle object.
[Sketch]
Select a center point and a vertex to create a rectangle.
Rectangle(Center Point 2)
This function enters the center point and two vertices to create a 2D Wire rectangle object.
[Sketch]
Select a center point and two vertices to create a rectangle.
Rectangle(Corner Point 1)
This function enters two vertices to create a 2D Wire rectangle object.
[Sketch]
Select two opposite vertices to create a rectangle.
Rectangle(Corner Point 2)
This function enters three vertices to create a 2D Wire rectangle object.
[Sketch]
Select three vertices to create a rectangle.
Circle(Center Point)
This function enters center point and a radius to create a 2D Wire circle object.
[Sketch]
Select a center point and a radius to create a circle.
Circle(3 Points)
This function enters three points to create a 2D Wire circle object.
[Sketch]
Select three points to create a circle that passes throught those three points.
Ellipse(Center Point)
This function enters a center point and two end points to create a 2D Wire ellipse object.
[Sketch]
Select a center point, a point in an axis and a point in the other axis to create an ellipse.
Ellipse(Corner Point)
This function enters both ends of an axis and one end of the other axis to create a 2D Wire ellipse object.
[Sketch]
Select both ends of an axis and one end of the other axis to create an ellipse.
Track(Center Point)
This function enters a center point and two end points to create a 2D Wire track object.
[Sketch]
Select a center point, one end point of a straight line and the radius of the semi-circle in order to create a track.
Track(Corner Point)
This function enters both ends of an axis and one end of the other axis to create a 2D Wire track object.
[Sketch]
Select a center of each of the two semicircular points and the radius of the semi-circle in order to create a track.
Polygon(Inscribed)
This function enters a center point and center of an edge to create a 2D Wire polygon object.
[Sketch]
Enter the number of sides and then select a center point and center of an edge to create a polygon.
Polygon(Circumscribed)
This function enters a center point and one vertex to create a 2D Wire polygon object.
[Sketch]
Enter the number of sides and then select a center point and a vertex to create a polygon.
Reference Materials