Sketch
- 이혜연 (Unlicensed)
Summary
Create a point and a line body object for sketch.
How to Run
Ribbon Menu > [Feature] Tab > [Sketch] Group > Sketch
Explanation
Point(Single Point)
This function selects a point and creates a point object at that location.
[Sketch]
Select a point and creates a point object at that location.
Point(Center of Points)
This function creates point objects at multiple point locations.
[Sketch]
Select multiple points and create point objects at those location.
Line(2 Points)
This function selects two points and creates a straight wire object that connects those two points.
[Sketch]
Select the start and end points to create a straight line that connects those two points.
Create multiple straight lines consecutively.
Poly Beam On
Click tab to manually input the length.
Arc(3 Points)
This function selects three points to create a wire arc object that passes through those three points.
[Sketch]
Select the start, middle and end point in order to create an arc that passes through those three points.
Create multiple arcs consecutively.
Poly Beam On
Click tab to manually input the length.
Arc(2 Points + Angle)
This function enters two points and an angle to create a wire arc object.
[Sketch]
Select the start point, end point and angle in order to create an arc.
Click tab to manually input the length.
Arc(2 Points + Radius)
This function enters two points and a radius to create a wire arc object.
[Sketch]
Select the start point, end point and radius in order to create an arc.
Click tab to manually input the length.
Arc(Center Point)
This function enters the center point, start point and end point to create a wire arc object.
[Sketch]
Select the center point, start point and end point in order to create an arc.
Click tab to manually input the length.
Arc(Tangent)
This function enters the reference line, start point and end point to create a wire arc object.
[Sketch]
Select the reference line, start point and end point in order to create an arc.
Semi-Ellipse
Select the reference line, start point and end point in order to create an arc.
[Sketch]
Select both ends of an axis and one end of the other axis to create a semi-ellipse.
Click tab to manually input the length.
Rectangle(Center Point 1)
This function enters a center point and a vertex to create a wire rectangle object.
[Sketch]
Select a center point and a vertex to create a rectangle.
Click tab to manually input the length.
Rectangle(Center Point 2)
This function enters the center point and two vertices to create a 2D Wire rectangle object.
[Sketch]
Select a center point and two vertices to create a rectangle.
Click tab to manually input the length.
Rectangle(Corner Point 1)
This function enters two vertices to create a 2D Wire rectangle object.
[Sketch]
Select two opposite vertices to create a rectangle.
Click tab to manually input the length.
Rectangle(Corner Point 2)
This function enters three vertices to create a 2D Wire rectangle object.
[Sketch]
Select three vertices to create a rectangle.
Click tab to manually input the length.
Circle(Center Point)
This function enters center point and a radius to create a 2D Wire circle object.
[Sketch]
Select a center point and a radius to create a circle.
Click tab to manually input the length.
Circle(3 Points)
This function enters three points to create a 2D Wire circle object.
[Sketch]
Select three points to create a circle that passes throught those three points.
Click tab to manually input the length.
Ellipse(Center Point)
This function enters a center point and two end points to create a 2D Wire ellipse object.
[Sketch]
Select a center point, a point in an axis and a point in the other axis to create an ellipse.
Click tab to manually input the length.
Ellipse(Corner Point)
This function enters both ends of an axis and one end of the other axis to create a 2D Wire ellipse object.
[Sketch]
Select both ends of an axis and one end of the other axis to create an ellipse.
Click tab to manually input the length.
Track(Center Point)
This function enters a center point and two end points to create a 2D Wire track object.
[Sketch]
Select a center point, one end point of a straight line and the radius of the semi-circle in order to create a track.
Click tab to manually input the length.
Track(Corner Point)
This function enters both ends of an axis and one end of the other axis to create a 2D Wire track object.
[Sketch]
Select a center of each of the two semicircular points and the radius of the semi-circle in order to create a track.
Click tab to manually input the length.
Polygon(Inscribed)
This function enters a center point and center of an edge to create a 2D Wire polygon object.
[Sketch]
Enter the number of sides and then select a center point and center of an edge to create a polygon.
Click tab to manually input the length.
Polygon(Circumscribed)
This function enters a center point and one vertex to create a 2D Wire polygon object.
[Sketch]
Enter the number of sides and then select a center point and a vertex to create a polygon.
Click tab to manually input the length.
Reference Materials