Longitudinal Rebar

Owned by 이혜연 (Unlicensed)
Last updated: Jul 05, 2022
2 min read

Summary

  • Draws (defines) the Longitude Rebar on the Draw Plane.

 

How to Run

[Rebar Draw Mode]

  • Ribbon Menu > [Rebar Draw] Tab > [Rebar] Group > Draw

 

Explanation

Select Transverse Rebar Method

Create a longitudinal rebar using the Select Transverse Rebar method.

[Tab] Draw

  • [Rebar Type]
    Select the type and method of rebars to be constructed.

    • Select Longitudinal Rebar.

    • Choose Select Transverse Rebar.

  • [Draw Rebar]
    Select the desired portion of the transverse rebar to position the longitudinal rebar profile.

    • Reverse Direction : Apply the position of the rebar in the opposite direction relative to the edge.

    • Reverse Start Point : Switch the start and end points of the longitudinal rebar profile.

[Tab] Property

 

2 Points Method

Create longitudinal rebar using the 2 Points method.

[Tab] Draw

  • [Rebar Type]
    Select the type and method of rebars to be constructed.

    • Select Longitudinal Rebar.

    • Select 2 Points.

  • [Draw Rebar]
    Click two points above the transverse rebar to position the longitudinal rebar profile.

[Tab] Property

 

Single Method

Create longitudinal rebars using the Single method.

[Tab] Draw

  • [Rebar Type]
    Select the type and method of rebars to be constructed.

    • Select Longitudinal Rebar.

    • Select Single.

  • [Draw Rebar]
    Click a point above the transverse rebar to position the longitudinal rebar profile.

[Tab] Property

 

Reference Materials