User Group

Owned by 이혜연 (Unlicensed)
Last updated: Jul 05, 2022
2 min read

Summary

  • Ungroup the created Rebar Group, or replace a line with the Rebar Group.

 

How to Run

  • Ribbon Menu > [Model] Tab > [Component] Group > Rebar > User Group

 

Explanation

Ungroup

Ungroup the Rebar Group and change into individual lines.

  • [Select Rebar Group]
    Select the rebar group to ungroup.

  • [Option]
    Delete Target Rebar

    • On : Delete the rebar group that has been replaced by wires.

    • Off : Do not delete the rebar group that has been replaced by wires.

 

Regroup

Change each line into User Group Rebar.

  • [Select Target]
    Select the wires to replace with the rebar group.

    • Select by Poly Line

      • On : When selecting the Wires, it is selected in units of Poly Line.

      • Off : Selected in units of Wires.

  • [Classification]
    Set the name and steel type of the rebar group.

    • Name : Enter the name for the rebar group.

    • Grade : Select the steel type of the rebar group.

  • [Specification]
    Set the dimensions, such as the diameter of the rebar.

    • Code : Select the criteria for the rebar specification.

    • Nominal Diameter : Select the rebar diameter according to the selected code.

    • Bending Radius : Automatically reflects the radius value according to the selected criteria and diameter. This can also be entered manually.

If the selected wires are continuous, change the wires to one rebar group regardless of the bending radius.

If the selected wires have discontinuities, change them into a rebar group by applying the Fillet method that reflects the bending radius.

  • [Arrangement]
    Enter the spacing information for the rebar group.

  • This input is independent of the actual spacing and is used only in the 2D drawing (Draft) to indicate the spacing value of the rebar annotation.

  • Multiple values can be entered. (ex. 3@0.2, 0.15, 3@0.3)

  • [Option]

    • Delete Target

      • On : Delete wires that have been replaced by rebar groups.

      • Off : Do not delete wires that have been replaced by rebar groups.

 

Convert to User Group

Ungroup the Rebar Group and change it into User Group Rebar.

  • [Select Rebar Group]
    Select the rebar group to change.

  • [Option]
    Delete Target Rebar

    • On : Delete the rebar group that has been replaced by the User Group Rebar.

    • Off : Do not delete the rebar group that has been replaced by User Group Rebar.

 

Reference Materials