Closed Stiffener

Owned by 안종건 (Deactivated)
May 03, 2023
1 min read

Summary

  • Create a Closed Stiffener on a Draw Plane.

 

How to Run

[Stiffener Draw Mode]

  • Ribbon Menu > [Stiffener Draw] Tab > [Stiffener] Group > Draw

 

Explanation

[Tab] Draw

  • [Stiffener Type]
    Select the type of stiffener.

    • Transverse Stiffener : Create a transverse stiffener.

    • Longitudinal Stiffener : Create a longitudinal stiffener.

    • Closed Stiffener : Create a closed stiffener.

  • [Draw Stiffener]
    Select the Edge(s) of the Target Member cross-section. The selected Edge(s) must be connected, and the start and end points of the connected Edge(s) will be connected by a straight line to create a Closed Stiffener.

 

Reference Materials