Property Tab

• [Name]

  • Assign a name to the manhole.
    
    

• [Shape]
  Section Type - Select the cross-sectional shape of the manhole. Enter the dimensions according to the selected cross-sectional shape.

  • Type 1 (Box) : Height, Width, Fillet Radius

  • Type 2 (Track) Horizontal : Height, Width

  • Type 3 (Track) Vertical : Height, Width

  • Type 4 (Half Track) Vertical: Height, Width, Fillet Radius

  • Type 5 (Round) : Diameter
    
    

• [Cardinal Point]
  Set the position where the manhole section will be placed.
  Use the dropdown menu to define the location of the manhole section.
  The default setting is Center-Bottom.

  Open

  

Property Tab

• [Manhole Stiffener]
  Set the detailed shape of the manhole stiffener.

  • Coming Type

    • Material

    • Width : Protrusion width

    • Thickness : Section thickness

Property Tab

• [Manhole Stiffener]
  Set the detailed shape of the manhole stiffener.

  • Flat Stiffener Type

    • Material

    • Width : Protrusion width

    • Thickness : Section thickness

    • Gap Distance : Distance between the manhole and the manhole stiffener

    • Protrusion Length : Protrusion length of the manhole stiffener

  • Reverse Direction
    Reverse the direction of the manhole stiffener surrounding the manhole.