Analysis Line Property
- 안종건 (Deactivated)
Summary
Check or edit property information of Analysis Line.
How to Run
Select Analysis Line on the screen.
Explanation
Common Tab
[Tab] Property
[Classfication]
Set the classification properties of Analysis Line.ID : Outputs the ID of Analysis Line.
Name : Enter the name of Analysis Line.
Type : Outputs the type of Analysis Line. There are Single Element and Multi Elements types of Analysis Line.
[Geometry]
Check or set the geometry properties of Analysis Line.
[Sectioning Option]
Sets the section acquisition options.Tapered Section : Sets whether or not to create an Analysis Line as a Tapered Section Group.
Off : Create Analysis Line with Single Section.
On : Analysis Line is created with Tapered Section.
Start Plane Offset : Set the position for acquiring the cross section on the starting point.
End Plane Offset : Set the position for acquiring the cross section on the end point.
In case of Tapered Section On,
offset distances from the start and end points of the Analysis Line Path must be entered respectively.
Analysis Tab
[Tab] Property
[Setting by Elements]
Setting by Elements : Select whether to set analysis properties for each individual element.
Off : Set the analysis properties in batches
On : Set analysis properties for each individual element.
Element List : Select the section(element) based on Section Points of Analysis Line.
This is a property that only Analysis Line of Multiple Elements Type has.