Summary

Define Anchorage, an accessory to the Tendon.
The anchorage defined by the Anchorage function is set in the property information of the tendon.

How to Run

Defines the anchorage of the tendon.

[Select Anchorage]
Define a new anchorage, or select an existing anchorage.
[Classification]
Sets the name of the anchorage.
[Anchorage]
Defines the shape of the anchorage.
- Use DB : Sets whether to use Anchorage Products (DB).
  - On : Define anchorage geometry using DB.
  - Off : The user enters dimensions to define the anchorage geometry.
- Anchorage Type : Select the type of anchorage. Plate / Flat / Dead End.
- Anchorage Part : Select each part according to the type of anchorage. Enter dimensions for each part.

User DB
- If User DB is used: Manufacturer → Anchorage Type → DB → Anchorage Part Settings
  - Manufacturer : Select the manufacturer. (Dywidag / Freyssinet / VSL)
  - DB : DB is provided for each Anchorage Type.
- If User DB is not used: Enter Anchorage Type → Anchorage Part → Dimension Input

[Rotation Angle]
Enter the angle of rotation of the anchorage.
[Option]
Choose whether to represent the helical rebar. The spiral rebar can only be created together if it is 'Anchorage Type: Plate'.