• Line(2 points) : Select two points to create a line.

• Arc(2 points + Angle): Creates an arc using two points and a central angle.

• Arc(2 points + Radius) : Creates an arc using two points and a radius.

• Arc(Three points) : Creates an arc using three points.

• Arc(Tangent) : Creates an arc in the direction of contact with a 1D object (Line, Arc).

• Spline(Interpolation) : Input a number of points on the spline and create a curve using a separate polynomial for each section.

• Spline(Control Point) : Creates a curve using a separate polynomial for each section by inputting the spline's starting point, control point, and end point.

• Semi-Ellipse : Creates a semi-ellipse by inputting the center of the ellipse, the point along the major axis, and the point along the minor axis.

• By Select : Creates a concrete beam member by selecting a Line on the plan drawing.

• By Select : Create a continuous poly beam to the selected all line objects.

• By Edge : Create discrete concrete beams for the selected each line object.

• Member With Solid : It shows both the centerline of the member and its solid shape for the preview shape.

• Member only : It s hows only the centerline of the member for the preview shape.

• Member type : Select a type of analysis for interface with midas Civil.

• Work type : Select the work type.

• Material : Select the material.

• Cardinal point : Set the position on the section corresponding to the centerline of the member.

  The section is positioned so that the placement of the section you have set matches the location of the centerline of the member.

• Beta angle : Enter the rotation angle of the section.

  The right-hand rule is applied to the Local x-axis of the member (start → end).

• Offset-y : Enter the additional separation distance in the direction of the Local y.

• Offset-z : Enter the additional separation distance in the direction of the Local z.

Displayed when Tapered member is checked ON

• Curve order-y : Sets the curve order for the change of shape in the direction of the Local y-axis.

• Curve order-z : Sets the curve order for the change of shape in the direction of the Local z-axis.