[Execute]
The By Curve function in Base Mode can be executed in the Drawing view of the [Drawing] group under the [Application] tab.

Run CAD ID
If you click the OK or Apply button after defining the By Curve function, this function calls up the CAD ID immediately.

Classification
Defines the name of the cross section created with By Curve.
The default name is “Curved Section 1”.

Select Target
Select objects by type to be added to the cross section to be created with By Curve.

• Member
  Concrete and steel objects can be filtered and selected.

• Rebar
  Rebar objects can be filtered and selected.

• Tendon
  Tendon objects can be filtered and selected.

• Terrain Surface
  Ground Surface and Boring Surface model objects can be filtered and selected.

• Slope Surface
  Fill & Cut Slope model objects can be filtered and selected.

Define Path
Specifies the path that serves as the basis for By Curve (Curved Drawing).

• By Layout
  Specifies Segment or Layout as the path.

• By Select
  Specifies a single Wire (Line) object as the path.

View Setting
Set the flattened section of By Curve (Curved drawing).

• Plane Direction
  Specifies the direction of the cross section for the Curved drawing.

• Sectioning Angle
  Defines the angle used to divide the Curved drawing.
  Smaller values increase precision but may affect performance.

• Activate Depth
  Option to display objects within the visible range centered on the Define Path, including the elevation section.

Video using the By Curve function

① Executing functions in Base Mode

② Select objects to be included in the cross section (Select Concrete, Terrain, Cut & Fill Model)

③ Select Define Path type : By Layout

④ Activate View Setting option

⑤ CAD ID drawing (cross-section) information linking