Displayed when Use User Section is ON

• Start of target line : Defines the plane that is normal to the master line as the profile plane at the position spaced in the direction of the end point by the offset value entered from the start point of the master line.

• End of target line : Defines the plane that is normal to the master line as the profile plane at the position spaced apart from the end point of the master line by the offset value entered.

• User defined : Defines the plane that is normal to the master line as the profile plane at the position on the master line corresponding to the entered ratio value.

• Distance from start profile plane* : Defines the plane that is normal to the master line as the profile plane at a distance away from the Start profile plane.
  (Displayed when Tapered member is ON)

Displayed when Use User Section is ON

• 3 points : You can insert General Profile through 3 point click (origin, X axis of profile, Y axis of profile) at the click of a button.

Displayed when Tapered Member is ON

• Direction : Sets the extraction direction of the profile.

• Length : Enter the extraction distance of the profile.

• Cardinal point : Sets the center line position based on the Bounding box of the profile.

• Offset-y : Input the additional distance from the recently set , present Cardinal point to the direction of the Local-y axis of the profile.

• Offset-z : Ÿ   Input the additional distance from the recently set, present Cardinal point to the direction of the Local-z axis of the profile.

• Define from view : When clicking on the button, you can set the Cardinal point by clicking anywhere on the profile plan.

• Quadrant connection : After matching the reference, vertices of each quadrant, vertices are sequentially matched according to the Loop Sequence of the profile in the direction of 'up → down' and 'left → right'.

• Quadrant half area : After matching the reference vertices of each quadrant, vertices are sequentially matched within each quadrant, according to the Loop Sequence of the profile.

• Loop sequence : After matching the reference vertices of the first quadrant , match the vertices sequentially according to the Loop Sequence of the profile.
  However, if the number of vertices of start and end profiles does not match, quadrant half area method is automatically applied.

• Clockwise : Rotates the Quadrant order of the End profile clockwise.

  Counterclockwise : Rotates the quadrant order of the end profile counterclockwise.

• Variation origin : Sets the reference point on the profile to determine whether the curve can be connected.

(If it is Polynomial)

• Curve order-y : Sets the order of the curve with respect to the local y-axis direction.

• Curve order-z : Sets the order of the curve with respect to the local z axis direction.

(If Arc)

• Radius-y : Local Enter radius of curve for y-axis direction.

• Radius-z : Enter the radius of the curve for the local z-axis direction.

• Convexity-y : Check if applying curve that changes convexly about Local y-axis direction.

• Convexity-z : Check if applying curve that changes convexly about Local z-axis direction.

• Object type : Indicates the type of object.

• Member type : You can select the type of member.

• Work type : You can select the type of work.

• Material : You can choose the material.