• [Execute]
  The By Layout function in Base Mode can be executed in the Drawing view of the [Drawing] group under the [Application] tab.

• Run CAD ID
  If you click the OK or Apply button after defining the By Plane function, this function calls up the CAD ID immediately.

• View Type
  Determine the view type.
  You can define a 2D View section by dividing it into Section / Plan / Side.

• Classification

  • Auto Name
    If the option is activated, when defining multiple cross sections, the names of the cross sections are automatically serialized according to the preset settings.

  • Prefix
    Defines the name used at the beginning of the name of the section.

  • Preset
    Select an ending rule with a preset name.

  • Postfix
    Defines the starting point of the name end of the section.

  • Name
    It shows in advance the name of the cross section that will be determined through the above rules.

    • Depending on the Preset setting, select a number format such as 1-1 / -1 and then enter a number in Postfix. A name that is a combination of Prefix and Postfix will appear.

    • Depending on the preset settings, select an English format such as A-A / a-a / -A / -a and then enter numbers from 1 to 24 in Postfix, and the name will be displayed in alphabetical order.

• Define Path
  Choose a method for defining the view.

  • By 1Point
    Pick a point on the layout to define the section view.

• Define Path
  Choose a method for defining the view.

  • By Segment
    Select Segment to define the section view.

  • By Layout
    Select Layout to define the section view.

• Alignment
  When Segment and Layout are selected, Parallel and Tangential Types where the cross-sectional configuration is parallel or orthogonal are supported.

• View Point
  Specify the view point location when By Segment or By Layout is selected.

  • Method : Determines how to position the view point.

    • By Ratio
      When Segment and Layout are selected, enter the Ratio value to Add or Modify the section view.

    • By Length
      When Segment and Layout are selected, enter the length value to Add or Modify the section view.

      • Start / End Offset : Enter the distance to separate from the start or end point of Segment and Layout.

      • Interval Length : Enter the length value to repeat.

    • By Division
      When Segment and Layout are selected, a cross-sectional view is created that divides the number of divisions entered.

    • User Defined
      When Segment and Layout are selected, a cross-sectional view is created by applying the length value entered by the user.
      When entering consecutive values, you can apply the repetition symbol “@” and the “,” symbol to define the next value.
      Example) 5@10, 5 m

• View Depth
  Define the visible range in front and behind the section view.

• Cutting Area
  Defines the size of the cross section.

• Rotation Narmal Direction
  Set the section view angle to the normal direction of the layout progress direction

• Video using the By Layout function

① Executing functions in Base Mode

② Define section name

③ Define Path: Select By Layout

④ Specify the position of the cross section

⑤ View Box size adjustment (View Depth and Cutting View)

⑥ CAD ID drawing (cross-section) information linking