Summaryummary | What is the a Work Type? | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Related Function | |||||||||||||||||
Type |
|
Q. What is
...
a Work Type?
A.
...
The Work Type defines the
...
construction type and the classification system
...
to form a quantity table by construction type.
The function of Work Type is a tool for composing the aggregate table for each quantity work that can be used to form a quantity table by construction type in the user environment.
Work The work type consists of a Structure function and a Field function.
Structure function: This is a function to set the function sets up a classification system so that all types of objects provided by CIM can have a hierarchical structure.
Field function: It is a function to set the standard This function sets up the specifications according to the object’s material type of the object.
Therefore, in CIM, it is possible to create CIM can make an aggregate table of quantity calculations by for each material/material based on the model created model .
...
Step 1. This is the configuration of Work Type Configuration.
...
Figure. 1 Composition of Work Type Configuration
Figure .1 This is the setting method for calculating the quantity for the model of the bridge substructure model in Figure. 1.
Base mode > Property > Work Type
| Info |
|---|
① Base mode > Property > Work Type Work Type is a tool that composes configures the quantity calculation sheet form and sets the quantity calculation range system. If you click Click Work Type , you can move to go to the setting stage of setup process for Structure and Field as a sub-function. |
| Info |
|---|
② Base mode > Property > Work Type > Structure It is a tool that can create This tool creates a structural system that composes a for the quantity calculation statementform. [It This is the same as the sheet structure system of Excel that appears through Excel linkage when generating the quantity calculation sheetthat is created in Excel.] |
| Info |
|---|
③ Base mode > Property > Work Type > Field This is a function to set the work type and standard according to feature sets the Work Type and standard based on the object type that appears shows in the quantity calculation sheet. |
...
Step 2. How to input Describes the process used to enter the Structure of the Work Type is explained.
...
...
Figure. 2 Structure classification systemClassification System
| Info |
|---|
painting. The range of quantity calculation range of structures can be specified through the Structure structure classification system of 2, and the in Figure 2. The classification system can be customized and enteredinput. In the The example of in the figure ), it above was created based on the bridge-substructure. Stage Level 1 – 1 Bridge Work Construction [This is the 1st stage of the upper classification system. Classified Level 1 classification for bridge constructionwork.] Stage Level 2 – - 1.1 Water Bridge [As the second stage of the upper classification system, the name of the bridge was defined and classifiedThis is Level 2 classification for defining the bridge name.] Step Level 3 – - 1.1.1 Upper hole [As the third stage of the upper classification system, the upper hole was shown based on Superstructure construction [This is Level 3 classification for the bridge structure, Subsystems where a subsystem can be added on a per superstructure basis.] Step Level 3 – - 1.1.2 Lower hole [As the 3rd stage of the upper classification system, the lower hole is shown based on the bridge structure,Classification systems Substructure construction [This is Level 3 classification for the bridge structure that can be entered in into the structure properties have been classifiedproperty.] Step Level 4 – - 1.1.2.1 Time shift Starting Pier – 1.1.2.1.1 shift Abutment body , 1.1.2.1.2 shift Abutment wing wall [As the 4th stage of the upper classification system, it is divided into the sub-classification system of an abutment structureThis is Level 4 classification for the bridge structure subsystem.] Step Level 4 – - 1.1.2.3 Pier - 1 – 1.1.2.3.1 Coping , 1.1.2.3.2 Column, 1.1.2.3.3 Foundation [As the 4th stage of the upper classification system, it is divided into the pier structure sub-classification systemThis is Level 4 classification for the bridge structure subsystem.] |
...
Step 3. This section describes how to input fields of Describes the process used to enter the Field of the Work Type.
The setting of under Work Type > Field is a function to set sets the quantity - related work construction type and specification standards using the model’s property information of the model.
...
Figure. 3 Field composition system Construction Structure (concreteConcrete)
| Info |
|---|
painting. Taking the field configuration system (concrete) of 3 If we take the Field Construction Structure (Concrete) in Figure 3. as an example,
Enter In the name of strength in the concrete composition system, and select Material in the Fied Type to keep the property information of the material as it is.make it availableconcrete field, enter the name as ‘Strength’ and select ‘Material’ for the Field Type to use the material properties.
Enter the name of Pour Concrete as ‘Pouring’ and select the ‘User DefinedType to be used for Fied ’ for the Field Type. If you select User Defined , if you attach a tag to the item > Name below, for example) Pouring pump car (0~15m) The Tag entered in the Quantity Accounting aggregation form is displayed. |
...
‘User Defined’ is selected, enter a name value (Ex. Concrete pump car pouring (0~15m)) under Items to add a tag in the quantity calculation. |
...
Figure. 4 Field configuration system (reinforcing barConstruction Structure (Rebar)
| Info |
|---|
painting. Taking the field configuration system (reinforcing bar) of 4 If we take the Field Construction Structure (Rebar) in Figure 4. as an example,
Enter the name of strength in the structure of the reinforcing bar material, and select Grade as the Fied In the rebar material field, enter the name as ‘Strength’ and select ‘Grade’ for the Field Type to use the rebar strength information of the reinforcing barproperties.
Enter the diameter in the structure of the reinforcing bar material and select the Diameter type to be applied to the Fied Type . [When writing the quantity calculation sheet, the counting by rebar diameter is completed.] Input and select [ Machining AssemblyIn the rebar material field, enter the name as ‘Diameter’ and select ‘Diameter’ for the Field Type. [Each rebar according to diameter is accounted for in the quantity calculation form.]
Select If ‘User Definedand ’ is selected, enter the name of the item name required for rebar processing and assembly in Item > Name in advancemake it applicableassembly process. |
...
Step 4. Describe Describes the material settingsMaterial Settings.
You can input and change the material Material information of the each model object can be entered and modified.
In the For example, as shown in the figure )above, the example of changing the name of the concrete to be displayed is changed and will be changed accordingly in the quantity calculation was explainedform.
...
Figure. 5 Material settings Settings (1)
| Info |
|---|
When entering the material as shown in Figure. 5 When entering the Material, ① Select Tool of Under Base mode > Property > Material . ② Select the Material Type on the left side of CIM. In the example in the figure)above, the Concrete Type is set. |
...
Figure. 6 Material settings Settings (2)
| Info |
|---|
Figure. 6 When entering the material as shown in Figure. 6, ③ Select the Standard Code of for the Material Type on the left side of CIM. In the example of the figure)above, C24 of KS01(KCI-2012) is selected. |
...
Figure. 7 Material settings Settings (3)
| Info |
|---|
painting. When entering the Material of material as shown in Figure. 7, ④ Changed Change the input name value of Name on the left side of CIM. Example in the figure) In the example above, 25-24-15 , the concrete aggregate dimensions - material strength - slump values were changedwas entered for the Aggregate Dimension-Material Strength-Slump. |
...
Step 5. The process of entering Describes the process used to enter the quantity calculation attribute property information into the CIM model is explained with a continuous videousing the animation below.
In The animation shows the course of the video, you can use process of using the Assign Tool to quickly input enter the property information into the model (member).
| Info |
|---|
The order of the videos is as followsanimation below shows the following. 1) Call Invoke the Works Tree. (Keyboard Shortcut key : Alt+`) 2) Modify Point Library - Modify Abutment (A1). 3) Assign > All Object > Structure : After entering the classification system for the quantity calculation, select a and apply the model (member) and apply it. 4) Enter the construction scheme ( Field ) of for the Reference reference object. 5) Assign > All Object > Field : Apply Matchprop the configuration system (Field) of the Reference object reference object field to the Target target object. 6) Check the content entered in the part |
...
data input for the member. |
...
| Tip |
|---|
|