/
Hotkey
Hotkey
- 이혜연 (Unlicensed)
- 김승수(Mason) (Unlicensed)
- 안종건 (Deactivated)
Owned by 이혜연 (Unlicensed)
midas CIM Hotkey List
Shortcut Key | Mode | Result |
|---|---|---|
F1 | All | Open CIM Learning Center homepage |
Alt + F1 | All | Open Hotkey Manual |
F2 | All | Show Only the object selected in Neutral's Select Phase. |
Ctrl + F2 | All | Hide Only the object selected in Neutral's Select Phase. |
F3 | All | Freeze the object selected in Neutral's Select Phase. |
Ctrl + F3 | All | Unfreeze the object selected in Neutral's Select Phase. |
F5 | All | Clear the message window at the bottom left of the screen |
Ctrl + F | All | Zoom fitting is performed based on the current camera viewpoint. |
Alt+ A | All | Show All all objects in the current mode. |
Ctrl + 1 | Base, PLB, CLB, AUB, User Section, Rebar, Stiffner | Execute the Import DWG/DXF function. |
Ctrl + 2 | Base, PLB, CLB, AUB, User Section, Rebar, Stiffner | Execute the Measure function. |
Ctrl + 3 | Base, PLB, CLB, AUB, User Section, Rebar, Stiffner | Execute the Global Option function. |
Ctrl + 4 | Base, PLB, CLB, AUB, User Section, Rebar, Stiffner | Execute the View Option function. |
Ctrl + Z | All | Undo |
Ctrl + Y | All | Redo |
Ctrl + S | Base | Save |
Ctrl + Shift + S | Base | Save As |
Alt + Z | All | Main Panel OK |
Alt + X | All | Main Panel Apply |
Alt + ` | All | Main Panel Cancel |
Alt + D | Base, PLB, CLB, AUB, Analysis, Construction | Switches the Datum On/Off status of View Option. |
Alt + P | Base, PLB, CLB, AUB, Analysis, Construction | Switches the Perspective On/Off status of View Option. |
Ctrl + D | Base, PLB, CLB, AUB, Analysis, Construction | Switches the Display Mode status of View Option. |
Alt + Q | All | Switch to the left tap of the Main Panel |
Alt + Shift + Q | All | Switch to the Tap at the top of the Main Panel |
Alt + Shift + W | All | Switch to the 2nd Tap at the top of the Main Panel. |
Ctrl + Space | All | Switch between ‘Not Select’ > ‘Neutral Select Target Active’ > ‘Library Unit Select’ options |
Ctrl + Shift + A | All | Auto Edge option On/Off |
Alt + Space bar | All | Freeze object (when using Feature or Edit function) reference option On/Off |
Alt + 1 | All | Switch to the currently active first tab on the left side of the Main Panel |
Alt + 2 | All | Switch to the currently active second tab on the left side of the Main Panel |
Alt + 3 | All | Switch to the currently active third tab on the left side of the Main Panel |
Alt + 4 | All | Switch to the currently active fourth tab on the left side of the Main Panel |
Alt + 8 | Base 제외 | Mode OK |
Alt + 9 | Base 제외 | Mode Apply |
Alt + 0 | Base 제외 | Mode Cancel |
Alt + F4 | All | Program exit |
Mouse wheel button click | All | When you click the mouse wheel button, the pivot position is set at that location. |
Double click the mouse wheel button | All | When there is a selected object, Zoom fit Selected |
Hold down Ctrl and drag the mouse wheel button | View | When you hold down the Ctrl button and drag the mouse wheel button, the view point rotates around the previous pivot position. |
Shift | View | If you move the mouse while holding down the Shift button while drawing, the mouse will move with the snap fixed. |
F / S /T | View | Switches the plane to Front (F, XZ plane), Side (S, YZ plane), and Top (T, XY plane) based on the snap captured on the screen. |
Ctrl + Click | Works tree | Select additionally (Release Select) |
Shift + Click | Works tree | Selects all Lists between the start point and the end point. |
Feature Function Hotkey
Shortcut Key | Result |
|---|---|
Ctrl + Shift + C | Sketch |
Ctrl + Shift + P | Points |
Ctrl + Shift + B | Points(by Layout) |
Ctrl + Shift + T | Clothoid |
Ctrl + Shift + F | Surface(Plane) |
Ctrl + Shift + U | Surface(Curved) |
Ctrl + Shift + O | Solid |
Ctrl + Shift + I | Primitive |
Ctrl + Shift + E | Extrude |
Ctrl + Shift + W | Sweep |
Ctrl + Shift + L | Loft(Face) |
Ctrl + Shift + V | Revolve |
Ctrl + Shift + X | Extract |
Ctrl + Shift + D | Explode |
Ctrl + Shift + R | Remove |
Edit Function Hotkey
Shortcut Key | Result |
|---|---|
Alt + M | Move |
Alt + C | Copy |
Alt + R | Rotate |
Alt + I | Mirror |
Alt + W | Sweep |
Alt + O | Offset |
Alt + J | Project |
Alt + L | Split |
Alt + N | Intersect |
Alt + E | Extend |
Alt + T | Trim |
Alt + G | Merge |
Alt + H | Chamfer Edge |
Alt + F | Fit Curve |
Alt + Shift + U | Union(Solid) |
Alt + Shift + N | Union(Surface) |
Alt + Shift + S | Subtract(Solid) |
Alt + Shift + I | Intersection(Solid) |
Alt + Shift + D | Divide(Solid) |
Alt + Shift + C | Chamfer Shape |
Alt + Shift + F | Fit Face |
Alt + Shift + A | Scale |
Alt + Shift + V | Move Vertex |
Alt + Shift + E | Move Edge |