Shortcuts used in midas CIM.
Shotcut Key | Applied Mode | Result |
---|---|---|
F1 | All | Connect to CIM Learning Center. |
F2 | All | Show Only the object selected in Neutral Select Phase. |
F5 | All | Clear bottom left message window. |
Alt + 8 | All | Set the mode to Mode OK. |
Alt + 9 | All | Set the mode to Mode Apply. |
Alt + 0 | All | Set the mode to Mode Cancel. |
Ctrl + F | All | Fits the screen zoom based on the current camera viewpoint. |
Ctrl + F2 | All | Hide the object selected in Neutral Select Phase. |
Alt + A | All | Show all objects in the current mode. |
Ctrl + 1 | Base, Point Library, Curve Library, Assembly Unit, User Section, Rebar, Stiffener | Run the Import DWG/DXF function. |
Ctrl + 2 | Base, Point Library, Curve Library, Assembly Unit, User Section, Rebar, Stiffener | Exit the current running function. |
Ctrl + 3 | ||
단축키 | 설명 | 단축키 | 설명 |
---|---|---|---|
F1 |
| Alt + D |
|
F2 |
| Alt + P |
|
F5 |
| Alt + S |
|
Ctrl + F2 |
| Alt + 8 |
|
Ctrl + A |
| Alt + 9 |
|
Ctrl + Space |
| Alt + 0 |
|
Ctrl + 1 |
| Alt + F4 |
|
Ctrl + 2 |
| Alt + ` |
|
Ctrl + 3 |
| Ctrl |
|
Ctrl + 4 |
| Shift |
|
Ctrl + Z |
| F / S /T |
|
Ctrl + Y |
| ||
Ctrl + S |
| ||
Ctrl + Shift + S |
|