[Drafter] How to Create a 2D Drawing (Rebar Section)

Figure.1

① Select the section to be used in CIM View.

　. (If you double-click the section name in the CIM View Work Tree window, the section is selected and zoomed in.)

② Left-click the View Box and drag to select it.

③ Find the reinforcing bar No. to match the purpose of the reinforcing drawing (section view or main rebar assembly drawing) and configure the reinforcing bar to be shown and hidden.

..... (For On / Off of rebar, if you select the section view window, the rebar list appears in the Objet dialog box, and you can turn on/off the check box.)

Figure. 2

▶ This is the process of selecting a style registered in Drafter.

① Drag the View Box to select it.

② Find the registered style name in the Style item and select it.

　In (Example of explanation), Drafter_Style S03 (Rebar Drawing None Hatch) was selected and applied.)

Figure. 4

▶ If there is a change such as style, right-click on the CIM View section name to display the Update dialog box.

▶ If you select the Update item, the drawing changes are generated and updated.

Figure. 4

▶ How to create reinforcing bar annotations is CIM Drawing (Drawing Creation) > Object Show/Hide (Object On/Off) >

　Select Rebar Annotation Show/Hide or enter the shortcut RAA .

▶ Reinforcing bar annotation creation options can be applied by selecting (Show/Hide) in the Command window.

▶ In Rebar Annotation Show/Hide (Turning on/off the rebar annotation object), the placement of rebar annotations is basically between rebar annotations.

　Reinforcing bar annotations are automatically placed through the avoidance function.

▶ On/Off of annotations for each reinforcing bar object can be turned on/off by selecting the View Box and then expanding the rebar tree in Object > Rebar.

Figure. 5

▶ To move the rebar annotation, 3 points are displayed when you select the reinforcing bar annotation.

　1st Point : You can change the position of the reinforcing bar annotation.

　2nd Point : You can move the reinforcing bar annotation.

　3rd Point : You can change the direction of rebar annotation.

▶ To align rebar annotations, select CIM Drawing > Annotation align or

　Enter the shortcut command ANN .

　(The execution method is alignment by executing the alignment function and drawing a line with the two points to be aligned.)

Figure. 6

▶ In addition to the cross-section creation method using By Plane in CIM, Drafter also includes

　You can create additional sections.

▶ In the example of the description), a cross section of the column was additionally created.

　Reference Link [Drafter] Add View Cutting (Cutting from the created section to create an additional section)

Figure. 7

▶ Create a section to be drawn with reference to Fig.1 ~ Fig.6.

　In (Example of explanation), the pier front view, side view, coping plan, and column / foundation plan were drawn.)

▶ Organize the angles you want to use and move them into CAD View Drawing model space.

　Reference link [Drafter] How to Create a Sheet

▶ In the example in Fig. 7), the angle applied in the general drawing method was copied and applied.

　(Drag & drop the section in the CIM View model space and place it on the angle.)

▶Create a drawing by placing the section according to the user drawing configuration, and adding the title and symbol of the drawing.

Figure. 8

▶ Dimension lines can be created by selecting CIM Drawing > Dimension > Linear Dimension or

　You can use it by entering the shortcut command LD .

▶ Also, CAD View Drawing In the model space, CAD-based dimension lines can be easily inserted for drawing by inserting dimension lines.

　Dimension lines placed in CAD View Drawing model space do not respond to changes due to model changes.

　Dimension lines to respond to model changes must be created in CIM View model space.

Figure. 9

▶ For the section created in CIM View , the View Box is automatically created and main items such as the section name, current style, and scale are displayed.

▶ A View Box is created in the CAD View space for drawing configuration, but it exists only as a Poly Line component.

▶ It is recommended to adjust the size of the View Box to check the section information or to use it by changing the Defpoints component layer that is not output.

Figure.10

▶ Drawings are saved and managed in the CIM file.

▶ Even when opening only midas Drafter, *.cim files with drawing information are opened by opening *.cim files.

　You can check the contents of the drawing.

▶ The file saving extension of midas Drafter is *.mdwg.

▶ To save for compatibility with Autocad, right-click on the CAD View drawing name to export or

　You can also save it with the Export function of Drafter > File, and the previously used Autocad *.dwg file is the same in Drfter.

　You can open and work with drawings.

▶ Drawings made by importing existing drawings are not linked with CIM.