Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Summary

  • Create a Stiffener Group by placing the Stiffener drawn from the plane in 3D.

How to Run

  • Ribbon Menu > [Model] Tab > [Component] Group > Stiffener > Array

Explanation

Array Along Path / Tapered Array Method

Arrange the stiffener using Array Along Path or Taped Array.

[Tab] Property

  • [Arrangement]
    Sets the placement interval for lateral stiffener.

Stiffener Property > Refer Arrangement

[Tab] Array

  • [Stiffener Type]
    Select the type of stiffener to arrange.

 Detailed Explanation (Stiffener Type)

  • Transverse Stiffener : Arrange lateral stiffener.

  • Longitudinal Stiffener : Arrange longitudinal stiffener.

  • All : Arrange all types of stiffeners.

  • [Target Type]
    Select the status of the stiffener to be arranged.

 Detailed Explanation (Target Type)

  • Draw Stiffener : Arrange the stiffener in the Draw Plane state.

  • Array Stiffener : Select an arranged stiffener to rearrange.

  • All : Arrange stiffener in all states.

  • [Method]
    Select how the stiffeners are arranged.

 Detailed Explanation (Method)

  • Array Along Path : Specifies the stiffener arrangement as a path. Only changes to the section above the Rebar Draw Plane are considered and longitudinal section changes are not reflected.

  • Tapered Array : Specifies the stiffener arrangement criteria for the shape of the object. Reflects the change in the shape of the stiffener according to the longitudinal section change of the side section.

  • Cancel Array : Restores the arranged stiffeners to the Draw Plane state before the arrangement.

  • [Select Stiffener]
    Select the stiffener to arrange.

  • [Select Array Target Member]
    Select the target member on which the selected stiffener will be arranged. The Array Path of the stiffener is recreated from the center line of the Array Target Member.

  • [Select Array Reference Member]
    Select the reference member on which the selected stiffener will be arranged. The Reference Member is used as a cross section reference for arranging the stiffener.

 Detailed Explanation (Array Target&Reference Member)

  • The roles of Array Target Members and Array Reference Members are as follows:

    • Array Target Member

      • Use the centerline of the target members as ArrayPath regeneration information.

      • Therefore, if the center line of the target member is overlaid or parallel, no stiffener is created.

    • Array Reference Member

      • Used for section reference to arrange stiffeners.

  • The Array Target Member needs to be selected even when arranging stiffeners on a single member.

  • [Define End Plane]
    Defines the end point plane on which the stiffener will be arranged.

Define Plane

  • [Reference Path of Spacing]
    Defines the arrangement path of the stiffener.

    • Geometric Line of 1D Member : Specifies the center line of the target member as the array path.

    • Select Edge : Select a Line object and set it as the Array path.

Cancel Array Method

Restores the arranged stiffener to the state of the drawplane before the arrangement.

[Tab] Array

  • [Method]
    Select how the stiffeners are arranged.

    • Select Cancel Array.

  • [Select Stiffener]
    Select an arranged stiffener group. Multiple stiffener groups can be selected.

The Cancel Array of a single stiffener group can be restored to the Drawplane state by selecting the stiffener group from the Neutral state.

Reference Materials

  • No labels