Summary
Draw (define) a Transverse Stiffener on a plane.
How to Run
[Stiffener Draw Mode]
Ribbon Menu > [Stiffener Draw] Tab > [Stiffener] Group > Draw
Explanation
Select Edge(s) Method
Create lateral stiffener using the Select Edge(s) method.
[Stiffener Type]
Select the type and method of stiffener to be drawn.Select Transverse Stiffener.
Select Select Edge(s).
[Draw Stiffener]
Select the Edge of the Target Member section. If the edges are connected, create a continuous stiffener.Reverse Direction Start Point : Apply the position of the stiffener in the opposite direction relative to the edge.
| Expand | ||
|---|---|---|
| ||
|
stiffener's start and end positions in opposite directions.
Sketch On Edge Method
Create lateral stiffener using the Sketch On Edge method.
[Stiffener Type]
Select the type and method of stiffener to be drawn.Select Transverse Stiffener.
Select Sketch On Edge.
[Draw Stiffener]
Click the two points above the Edge in the Target Member section. Pick Point 1 is the point of stiffener and Pick Point 2 is the end point.Reverse Direction Start Point : Apply the position of the stiffener's start and end positions in the opposite direction relative to the edgedirections.
| Expand | ||
|---|---|---|
| ||
|