개요
Tendon Profile을 조합하여 Longitudinal Tendon을 생성합니다.
Summary
Create a Longitudinal Tendon by combining the Tendon Profiles.
How to Run
[Curve Library / Assembly Unit Mode]
Ribbon Menu > [Model] Tab > [Component] Group > Tendon > Create
Explanation
Tendon Combination
Tendon Profile을 조합하여 Tendon을 생성합니다Create a Longitudinal Tendon by combining the Tendon Profiles.
[Tab] Create
[Reference Point]
텐던 좌표의 기준 원점을 정의합니다Defines the reference origin of the tendon coordinates.Offset (Horizontal/Vertical): Tendon Path의 시작점으로부터 입력값만큼 수평/수직으로 이동시켜 Reference point를 정의합니다Define the reference point by moving it horizontally/vertically from the start point of the Tendon Path as input.
[Anchorage]
Anchorage 기능에서 정의한 텐던의 Anchorage를 설정합니다Set the Anchorage of the Tendon defined by the Anchorage function.[Preview]
생성되는 텐던의 Preview를 보여줍니다Shows the preview of the created tendon.
[Tab] Property
Info |
---|
Sub Panel
[Section View]
텐던 진행방향 단면의 View입니다.Tendon Point와 Reference Point의 위치가 각각 빨간색, 파란색 점으로 단면에 표시됩니다.
Section View 하단의 위쪽 다이얼의 위치는 현재 단면이 위치한 Station을 나타냅니다. (좌측→우측)
Section View 하단의 아래쪽 다이얼은 Tendon name의 Size를 조절할 수 있습니다The positions of the Tendon Point and the Reference Point are shown in red and blue, respectively.
The position of the upper dial at the bottom of Section View indicates the station where the current section is located. (Left → Right)
The lower dial at the bottom of Section View can adjust the size of the Tendon name.
[Side View]
텐던 진행방향의 측면 View를 나타냅니다. 즉, 설정한 Vertical Profile의 배치를 나타냅니다Displays the side view of the direction of the tendon progression. This indicates the placement of a set Vertical Profile.[Top View]
텐던 진행방향의 상부면 View를 나타냅니다. 즉, 설정한 Horizontal Profile의 배치를 나타냅니다Displays the top view of the direction of the tendon progression. This indicates the placement of a set Horizontal Profile.[Profile Combination Table]
Combines the Vertical Profile 및 and Horizontal Profile을 조합하고, Tendon을 3D 공간 상에 배치합니다Profile, and places the Tendon in 3D space.
This is the view of the Tendon direction section.
Expand | ||
---|---|---|
| ||
|
|