...
Shotcut Key | Applied Mode | Result |
|---|---|---|
F1 | All | Connect to CIM Learning Center. |
F2 | All | Show Only the object selected in Neutral Select Phase. |
F5 | All | Clear bottom left message window. |
Alt + 8 | All | Set the mode to Mode OK. |
Alt + 9 | All | Set the mode to Mode Apply. |
Alt + 0 | All | Set the mode to Mode Cancel. |
Ctrl + F | All | Fits the screen zoom based on the current camera viewpoint. |
Ctrl + F2 | All | Hide the object selected in Neutral Select Phase. |
Alt + A | All | Show all objects in the current mode. |
Ctrl + 1 | Base, Point Library, Curve Library, Assembly Unit, User Section, Rebar, Stiffener | Run Execute the Import “Import DWG/DXF DXF” function. |
Ctrl + 2 | Base, Point Library, Curve Library, Assembly Unit, User Section, Rebar, Stiffener | Exit the current running function. |
Ctrl + 3 |
단축키
설명
단축키
설명
F1
Connect to CIM Learning Center
Alt + D
(View Feature) Set the Datum On or Off
F2
Show Only the object selected in Neutral Select Phase
Alt + P
(View Feature) Set the Perspective On or Off
F5
Clear bottom left message window
Alt + S
(View Feature) Switch to Display Mode
Ctrl + F2
Hide the object selected in Neutral Select Phase
Alt + 8
Set the mode to Mode OK
Ctrl + A
Show All Objects
Alt + 9
Set the mode to Mode Apply
Ctrl + Space
Zoom Fit from curent camera perspective
Alt + 0
Set the mode to Mode Cancel
Ctrl + 1
Import DWG/DXF extension files
Alt + F4
Exit program
Ctrl + 2
Execute Measure Tool
Alt + `
Open Works Tree
Ctrl + 3
Execute Global Option feature
Ctrl
Dragging the cursor while pressing Ctrl enables rotation around the center of the selected part
Ctrl + 4
Execute View Option feature
Shift
Dragging the cursor while pressing Shift enables pan without rotation
Ctrl + Z
Undo action
F / S /T
Toggle between XZ, YZ and XY plane views
Ctrl + Y
Redo action
Ctrl + S
Save current file
Ctrl + Shift + S
Base, Point Library, Curve Library, Assembly Unit, User Section, Rebar, Stiffener | Exit the current running function. | |
Ctrl + 4 | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Exit the current running function. |
Ctrl + Z | All | Go back to the previous operation. (Undo) |
Ctrl + Y | All | Go back to the previous operation. (Redo) |
Ctrl + S | Base | Save the current file. |
Ctrl + Shift + S | Base | Execute the “Save As” function. |
Ctrl + Space | All | Main Panel : OK |
Alt + Space | All | Main Panel : Apply |
Alt + ` | All | Main Panel : Cancel |
Alt + D | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Toggle the “Datum On/Off” state. |
Alt + P | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Toggle the “Orthogonal On/Off” state. |
Alt + S, Ctrl + D | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Toggle the “Display Mode“ state. |
Alt + Q | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Toggle the “Tab Selection“ state. |
Alt + N | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Toggle the “Neutral Selection” activation state. |
Alt + M | Base, Assembly Unit | Toggle the “Assgined Library Selection” option state. |
Alt + 1 | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Switch to the 1st tab. |
Alt + 2 | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Switch to the 2nd tab. |
Alt + 3 | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Switch to the 3rd tab. |
Alt + 4 | Base, Point Library, Curve Library, Assembly Unit, Analysis, Construction | Switch to the 4th tab. |
Alt + 8 | All | Mode : OK |
Alt + 9 | All | Mode : Apply |
Alt + 0 | All | Mode : Cancel |
Alt + F4 | All | Exit the program. |
Click the mouse middle button | All | The clicked location is set as the pivot point. |
Double click the mouse middle button | All | If there is a selected object, zoom fit is based on the selected object. |
Ctrl + Dragging the mouse middle button | View | The view point rotates around the previous pivot point. |
Shift | View | During the Draw operation, the snap point is fixed. |
F / S / T | View | Change the plane to front(F, XZ plane), side(S, YZ plane), top(T, XY plane) based on the snap point. |
Ctrl + Click | Worktree | Selects or deselects additional items in the worktree. |
Shift + Click | Worktree | Selects all items in the selected worktree area. |