Summary

This function sets up the placement of a cross-sectional view drawn in CIM View Mode on a sheet.
By defining the sheet area and pre-placing library sections within it, you can save and reuse the corresponding CIM Library file without needing a separate sheet setting process, even when reusing it after exporting and importing.

How to Run

[CIM View Mode]

The Sheet Region [SR] command can be executed or accessed through the Sheet Region function under the INFRA-DESIGN menu tab.

Sheet Region, Shortcut key : SS	Commentary contents

Sheet Region, Shortcut key : SS

Commentary contents

[Command]
Run the Sheet Region function from the tree menu or use the command SHEETREGION (SR) in the Command window.
- Sheet Region feature is applicable only to Views created from the Library.
  (The feature is not executed in the BASE and CAD mode.)

[Command]
- Paper size [A4(A4)/A3(A3)/ A2(A2)/ A1(A1)/ A0(A0)] <A1> : A1
  Set the paper size on which to place the single sided section.
- Page Orientation [Landscape(L)/Portrait(P)] <L> : L
  Set the paper orientation. (horizontal or vertical)
- Scale {100} : 1:100
  Enter a scale value for the sheet.
- Sheet Name [Option(OP)] : GENERAL DRAWING
  Enter a name to manage the sheet.
  If not entered, the view area name will be used. Entering Option [OP] will bring up the sheet settings window.
- Sheet Number [Option(OP)] <001> : 001
  Enter the number to manage the sheet.

① Execute the function.

② Set paper size : A1

③ Set paper orientation : L

④ Set scale : 1:100

⑤ Set Sheet Name : Check and apply in option settings

⑥ Position the sheet.

⑦ Place on the work screen : CAD View Mode New window placed on work scree