3D View Rebar Report

Owned by 박상렬(Dwayne)
Jul 08, 2024
3 min read

Summary

  • When creating a 3D view cross section based on a model with rebar modeling, this function subdivides the rebars into individual bars and displays them in a rebar material table(Bar Bending Schedule).

 

How to Run

[CIM View Mode]

  • Ribbon Menu > [INFRA-DESIGN] Tab > 3D View Rebar Report [3DR]

 

Explanation

How to use 3D View Rebar Report.

Run the 3D View Rebar Report [3DR] command or execute the 3D View Rebar Report function of the INFRA-DESIGN menu tab.

3D View Rebar Report, Shortcut key : 3DR

Commentary contents

3D View Rebar Report, Shortcut key : 3DR

Commentary contents

 

image-20240708-011438.png

 

  • [Command]
    Execute 3D View Rebar Report in the tree menu, or execute 3DREBARGENERATE (3DR) in the Command window.

 

image-20240708-011454.png

 

  • To utilize the 3D View rebar report function, at least one 3D View cross section containing rebar must be created.

 

 

  • 3D View Select / Select Rebar

    • 3D View Select :
      Select the View Box of the 3D View by clicking the check mark to the right of the view name.
      When you select a 3D View, the name of that section is displayed.

    • Select Rebar

      • All Rebar in 3D View :
        All rebars included in the 3D View are displayed in a rebar report.

      • Select Rebar Groups :
        You can manually select only the rebars to be displayed in the rebar report.

 

 

  • Rebar Table Style
    Define rebar material bill styles within the rebar report.
    The rebar material table style is set as default.

 

 

  • Options

    • 3D View - Table Alignment : Left / Middle / Right
      When creating a rebar report, set the alignment status of the section view and the rebar material table.

    • Use Original View :
      Defines the scale applied to the rebar report. (Apply default setting 1:100)
      Applying this option generates a rebar report with the scale of the original 3D View section applied.
      (This applies to the annotations of rebars included in the rebar report and the text size of the rebar material table.)

    • Show Rebar Annotation :
      When this option is applied, rebar annotations are included and displayed in the 3D View section.

    • Copy Original View Dimension :
      If the 3D View original section has 2.5D dimensions, copy them and apply them to the 3D View rebar report section.

    • Generated as a Single Report :
      When rebars are selected using the direct selection method of Select rebar groups, the option button is activated, and the rebars are not separated and appear in a single report.

 

 

  • 3D View Rebar Report Generation Results
    A 3D View rebar report is created by classifying the rebar included in the 3D View cross section.