• 3 points : Rotate move or copy in the 3 Points method.

• Axis & Anlge : Enter the rotation axis and rotation angle to move or copy the rotation.

• By UCS : Rotate or copy by using UCS.

Displayed when Type > Axis & Angle

Displayed when Type > By UCS

Displayed when Type > Axis & Angle

• Line(2 points) : Select two points to set the direction vector. The first point is the starting point, and the second point is the end point.

• By Select(Edge) : Select an existing straight line to set the direction vector.

Displayed when Type > By UCS

Displayed when Type > 3 Points

• Define circular arcs to define rotational movement bases and paths. Then, rotate or copy them.

  The first click point is the rotation base point, and the second and third click points are the starting and end points of the arc.

Displayed when Type > Axis & Angle

• Angle : ‘Input the rotation angle in the form of 'count @ angle'.

• Radial increment : Input the radial movement distance.

• Axial increment : Input the movement distance in the direction of rotation axis.

• Bounding Box-All : The box that surrounds the entire target object is shown as Preview.

• Bounding Box-Each : Each box that wraps the target object appears in Preview.

• Original Model : The preview is the same as that of the original object.