Chamfer Edge

Owned by 이혜연 (Unlicensed)
Last updated: Jul 04, 2022
3 min read

Summary

Apply Fillet or Chamfer to the vertex of a 2D Wire Body object.

 

How to Run

  • Ribbon Menu > [Edit] Tab > [Edit Edge] Group > Chamfer

 

Explanation

Fillet Feature

This feature applies fillets to the vertices of the selected object.

  • [Type]

    • Fillet : Use the Fillet feature.

    • Chamfer : Use the Chamfer feature.

  • [Fileter Radius]
    Enter the length of the arc radius that is applied to the fillet.

  • [Selection Filter]
    Sets the method for selecting the location where to apply the fillet.

  • Edge : Select two consecutive edges to select the point where to apply the fillet.

  • Vertex : Select one vertex to select the point where to apply the fillet.

  • [Pick Target]
    Select the location for the fillet.

  • [Option]

    • Merge to Poly Line : When set to On, the two edges that were initially separate objects are merged into a single object where the fillet is applied. If the edge of the original object is a single object, a continuous object is created regardless of the Option check.

    • Keep Cut-Out Edge : Sets whether to keep the vertex prior to applying the fillet.

     

 

 

Chamfer Feature

This feature applies chamfers to the vertices of the selected object.

  • [Type]

    • Fillet : Use the Fillet feature.

    • Chamfer : Use the Chamfer feature.

  • [Chamfer Length]
    Enter the length of the chamfer to apply. The length entered for Length 1 is applied to Edge 1, and the length entered for Length 2 is applied to Edge 2.

  • [Selection Filter]
    Sets the method for selecting the location where to apply the chamfer.

  • Edge : Select two consecutive edges to select the point where to apply the chamfer.

  • Vertex : Select one vertex to select the point where to apply the chamfer.

  • [Pick Target]
    Select two consecutive edges to select the target point.

  • [Option]

    • Merge to Poly Line : When set to On, the two edges that were initially separate objects are merged into a single object where the chamfer is applied. If the edge of the original object is a single object, a continuous object is created regardless of the Option check.

    • Keep Cut-Out Edge : Sets whether to keep the vertex prior to applying the chamfer.

 

 

Reference Materials