By Plane
- 이두영
- Daniel Lee (Unlicensed)
- Anonymous
- 1 Overview of Functions
- 2 Details of Functions
- 2.1 Create Tab
- 2.1.1 On/Off Option
- 2.1.2 Classification
- 2.1.3 Define plane
- 2.1.4 View depth
- 2.1.5 Cutting area
- 2.1 Create Tab
Overview of Functions
Define a view plane for generating drawing information for cross sections of arbitrary position. It generates drawing information based on the location and extent of the reference planes and updates them to MIDAS Drafter.
Details of Functions
Create Tab
On/Off Option
When checked, MIDAS Drafter is launched and drawing information is updated from the created view section information.
Classification
Defines the basic information of the view plane to be created by the cutting plane.
Name : Enter the section name of the view plane to be created.
View group : Specify the Group of the view plane. Select the section group defined in View > Group
Define plane
By Select : Select a face on the plan drawing to define the vertical plane.
3 Points : Plane is defined by consisting of 3 points by taking 3 points on the plan drawing.
Curve Normal : Defines a vertical plane as a plane by selecting a point on the line on the plan drawing.
By Offset : By selecting an existing face on the plan drawing and define the plane at an offset position.
Select Rebar Plane : Select the drawn Rebar to define the plane where the Rebar is drawn.
View depth
Front depth : Enter the front view thickness (+ y direction) of the defined view plane.
Rear depth : Enter the thickness of the rear view range (-y direction) of the defined view plane.
Cutting area
Width : Enter the width (x direction) of the view plane.
Height : Enter the height of the view plane (z direction).