/
Point Spring

Point Spring

Summary


  • Create a point spring at the end of geometry.

How to Run


  • Ribbon Menu > [Model] Tab > [Analysis] Group > Point Spring

Explanation


[Tab] Create

  • [Select Target]
    Select the vertex to place the Point Spring.
    Only the vertices of 1D Geometry Line can be selected.

  • [Spring Type]
    Choose a Spring Type. 
    Linear, Compression Only, and Tension Only types are provided. 
    Depending on the Spring Type selection, the stiffness spring value input setting is different.

  • [Stiffness]

    • Spring Type : Linear

      • Set Fixed or enter a linear elastic spring stiffness value.

    • Spring Type : Compression Only

      • Enter the compression-only spring stiffness value.

      • Enter the orientation of the spring based on the nodal coordinate system.

    • Spring Type : Tension Only

      • Enter the tension-only spring stiffness value.

      • Enter the orientation of the spring based on the nodal coordinate system.

  • [Damping Constant]
    Spring Type : This setting is only valid for Linear.

    • Enter the spring damping constant through the spring damping constant option setting.

Reference Materials


 

 

Related content

Longitudinal Stiffener
Longitudinal Stiffener
More like this
Stiffener (Array)
Stiffener (Array)
More like this
Closed Stiffener
Closed Stiffener
More like this
Transverse Stiffener
Transverse Stiffener
More like this
[Draw] Diaphragm Stiffener 
[Draw] Diaphragm Stiffener 
More like this