Summary

Defines the default and constraint parameters for the current mode.
Changes the value of the parameter in the current mode or the constraint parameter defined in the lower mode.

How to Run

[User Section Mode]

Ribbon Menu > [User Section] Tab > [Parametric Tools] Group > Parameter > Edit

Explanation

Define Parameters (Base Parameter)

[Base Parameter]
- Up Button : Moves the registration order of the parameters currently selected in the table up by one row.
- Down Button : Moves the registration order of the parameters currently selected in the table down by one row.
Table
- Type : Set the type of parameter.
- Parameter Name : Enter the name of the parameter.
- Variable Name : Enter the name of the parameter variable.
- Length : For parameters with type set to "Length", the Length text box is enabled and the length can be entered.
- Angle : For parameters with type set to "Angle", the Angle text box is enabled and the length can be entered.
- Coordinate : For parameters with type set to "Coordinate", the Length text box is enabled and the coordinates can be entered.

Link the defined parameters to a dimension or a reference line and then change the parameter variable values to modify the user-defined section shape.

Reference - Link Parameter and Change Shape(User Section)

Definition of Parameters (Constrained Parameter)

[Constraint Parameter]
- Up Button : Moves the registration order of the parameters currently selected in the table up by one row.
- Down Button : Moves the registration order of the parameters currently selected in the table down by one row.
Table
- Type : Set the type of parameter.
- Parameter Name : Enter the name of the parameter.
- Variable Name : Enter the name of the parameter variable.
- Equation : If Functional is set to On, the Equation field is activated and the function using the variable name of the base parameter can be entered.
- Length : For parameters with type set to "Length", the Length text box is enabled and the length can be entered.
- Angle : For parameters with type set to "Angle", the Angle text box is enabled and the length can be entered.
- Coordinate : For parameters with type set to "Coordinate", the Length text box is enabled and the coordinates can be entered.

If Functional is set to On, the Equation field is activated and the function with the variable name in the default parameter can be used. Through this, multiple parameters can be calculated automatically by using a single default parameter value.