Constraint
Summary
Create a constraint.
How to Run
[User Section Mode]
Ribbon Menu > [User Section] Tab > [Parametric Tools] Group > Constraint
Explanation
Create Constraints
Creates a constraint on the selected Vertex, Reference Line, or Edge.
This function selects the type of constraint.
[Constraint Type]
Fixed :
A constraint that requires the Origin of the selected Vertex or Reference Line to be fixed at its original position.
Horizontal :
Constraint that requires the selected Edge to be horizontally oriented.
Vertical :
Constraint that requires the selected edge to be oriented vertically.
Parallel :
Constraint that the selected edge must be parallel to the Reference Line.
Perpendicular :
Constraint that the selected edge must be perpendicular to the Reference Line.
Tangent
Constraint that the selected arc(Circle, Circle Arc, Ellipse, Elipse Arc) must be tangent to the contact edge.
Collinear :
Constraint that the selected edge must be above the Reference Line.
Coincident :
Constraint that the selected Vertex must be above the Reference Line.
[Select Vertex]
Reference Materials