Summary

Sets a user coordinate system that does not follow the global coordinate system.

How to Run

Define the user coordinate system (UCS).

[Classification]
Set the ID and name of the UCS coordinate system.
[Coordinate System]
Use 3 points method to set the USC coordinate system.
- Reference point : select the origin of the UCS coordinate system. Once selected, the coordinates of the origin are displayed.
- X-axis : select a point in the x direction of the UCS coordinate system. Once selected, a vector in the x-direction is displayed.
- Y-axis : select a point in the y direction of the UCS coordinate system. Once selected, a vector in the y-direction is displayed.

Registered UCS can be selected from the coordinate system filter at the bottom of the screen.
If select UCS, actions such as Sketch are worked based on the UCS specified by the user.

Reference - Status Bar