[Classification]
Select coordinats.

[Method]
Select the method to measure coordinate.

• Point : Select the coordinates manually.

• Select Vertex : Select the existing vertex.

[Value]
The x, y, z coordinates of the selected point ared displayed.

[Classification]
Select the slope.

[Select Path]
Set the reference path.

[Pick Point on Face]
Select a point on the surface to measure the slope from the path.

[Value]
Displays the slope (%), the ratio of horizontal distance to vertical distance 1, and the slope angle value.

[Classification]
Select the distance(Length).

[Method]
Select the method to measure coordinate.

• Point-Point : Measures the distance between two points.

• Point-Sub Shape : Mesures the shortest distance between a point and a sub-shape.

• Between Sub Shapes : Measures the shortest distance between two sub-shapes.

• Curve Length : Measures the sum of one or more edges.

[Value]
Displayed the measured value.

[Classification]
Select the tangent.

[Pick Edge]
Select the edge to measure.

[Value]
The direction vector of the selected edge is displayed.

[Classification]
Select the angle.

[Method]
Select the method to measure the angle.

• 3 Points : Select the start point, center point, end point to measure the angle in between.

• Line-Line : Measure the intersecting angle between the two edges.

[Value]
Display the measured distance.

[Classification]
Select the area.

[Method]
Select the method to measure area.

• Select Face(s) : Measure the area of the selected faces.

• Select Body(s) : Measure the surface area of the selected bodies.

[Value]
Display the measured area.

[Classification]
Select volume.

[Select Target]
Select the 3D body to measure volume.

[Value]
Displays the measured volume.