[Reset to Initial State]
Resets to the initial state when the program was installed.

[Display]
Show/Hide graphis on the workspace.

• Datum, Axis, Plane : The axis and plane of the datum is displayed on the screen.

[Member Geometry, Vertex Label, Mesh Seed Label]

• Member Geometry : 1D, 2D member geometries are displayed.

• Vertex Label : The vertices of the geometry are displayed.

• Mesh Seed Label : The seed label is shown at the entered mesh seed location.

[Support Label, DOF Information]
Displays support label and DOF information.

[2D Analysis Model]
Displays the analysis model created using plate line.

[Texture]
Shows the surface material of the object.

[Shadow]
Shows the shadow of the object.

[Select Frozen Sub Shape]
The sub shape of the frozen object can be selected in the function.

[Camera Effect]
This function expresses the shape differently by changing the angle of the camera.

• Perspective : The model is more pronounced by applying a wider angle than the normal angle.

[Level of Detail]
Adjusts the rendering quality to improve speed.
Setting at High Quality improves the CAD quality but reduces the rendering speed.

[Anti-Aliasing]
This is a function that expresses the edges more smoothly when the edges are concentrated so that the edges can be seen better.
It is expressed more smoothly in the order of Off - Low - High

[Dynamic Quality]
When the frame per second (FPS) is less than the value entered, it temporarily lowers the quality of CAD during operation such as movement and rotation to speed up. After the operation is complete, the quality of the CAD is restored.

[Reset to Initial State]
Resets to the initial state when the program was installed.

[Display Mode]
Sets the model to show shading and edges.

[Color]
Sets the color for each object provided by CIM.

• Freeze : Sets the color for frozen object.

  • By Object : Sets the color from the properties window.

  • By Mono : Single color is applied to all frozen objects.

• Concrete Member : Sets the color for concrete object.

  • By Object : Sets the color from the properties window.

  • By Material : Set color by material.

  • By Mono : Single color is applied to all objects.

• Steel Member : Sets the color for a concrete object.

  • By Object : Sets the color from the Steel object properties window.

  • By Material : Set color of the Steel object's Material (SS400, etc.).

  • By Mono : Single color is applied to all steel objects.

• Rebar : Rebar Set color for rebar object.

  • By Diameter : Set color based on diameter. D(n) ≤ nth Color＜D(n+1)

  • By Mono : Single color is applied to all rebar objects.

• Tendon : Set color for Tendon object.

  • By Group : Set color by tendon group.

  • By Material : Set color of the Steel object's Material (SS400, etc.). (Tendon uses the material of steel.)

  • By Mono : Single color is applied to all tendon objects.

• Stiffener : Set color for stiffener object.

  • By Section : Set color by section type of stiffener.

  • By Material : Set color of the Steel object's Material (SS400, etc.). (Stiffener uses the material of steel.)

  • By Mono : Single color is applied to all stiffener objects.

• Bolt : Set color for bolt object.

  • By Bolt Type : Set color by bolt type.

  • By Mono : Single color is applied to all bolt objects.

[Transparency]
Sets transparency for each object unit provided by CIM.

• Concrete Member : Sets transparency for the concrete object.

  • By Object : Sets the transparency set in concrete properties window.

  • By Mono : Applies same transparency to all concrete objects.

• Steel Member : Sets transparency for the steel object.

  • By Object : Sets the transparency set in steel properties window.

  • By Mono : Applies same transparency to all steel objects.

• Stiffener : Sets transparency for the stiffener object.

  • By Mono : Applies same transparency to all stiffener objects.

• Bolt : Sets transparency for the bolt object.

  • By Mono : Applies same transparency to all bolt objects.

• Body : Sets transparency for the body object.

  • By Object : Sets the transparency set in body properties window.

  • By Mono : Applies same transparency to all body objects.