개요
객체의 속성창을 통해 매개변수와의 연동 관계를 설정합니다.
매개변수와 연동되는 객체와 속성은 아래와 같습니다.
User Section 모드
Reference Line : 회전 각도
Dimension : 치수 값
Point Library 모드
Constraint Point : X, Y, Z 좌표
실행
[User Section Mode]
Reference Line
화면에서 Reference Line을 선택
Dimension
Works Tree 실행
Works Tree에 등록되어 있는 Dimension에서 마우스 오른쪽 버튼 클릭
Context Menu의 Property 클릭
[Point Library Mode]
Constraint Point
화면에서 Constraint Point를 선택
설명
Reference Line의 회전 각도 연동
Reference Line의 각도를 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다.
[Rotation]
Parameter : 선택한 Reference Line의 회전 각도를 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다.
유형을 “Angle”로 설정한 매개변수만 연동할 수 있으며, 매개변수를 연동하면 Value 입력란이 비활성화 됩니다.
Dimension의 치수 값 연동
Dimension의 치수 값을 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다.
[Dimension]
Parameter : 선택한 Dimension의 치수 값을 변경하여 단면의 모습을 해당 값에 연동하여 변경합니다.
유형을 “Length”로 설정한 매개변수만 연동할 수 있으며, 매개변수를 연동하면 Value 입력란이 비활성화 됩니다.
Constraint Point의 좌표 연동
영상 삽입
[Geometry]
Parameter (X)
Constraint Point의 X 좌표와 연동할 매개변수를 설정합니다.Parameter (Y)
Constraint Point의 Y 좌표와 연동할 매개변수를 설정합니다.Parameter (Z)
Constraint Point의 Z 좌표와 연동할 매개변수를 설정합니다.
유형을 “Coordinate”로 설정한 매개변수만 연동할 수 있으며, 매개변수를 연동하면 Geometry 테이블의 셀이 비활성화 됩니다.
참고자료
참고자료 링크