Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 2 Current »

Overview of Functions

[Shortcut Command: ROF]

This function turns the rebar on or off for the View created in CIM. When you create a section from the CIM, rebars are created concurrently if rebars are present in the model. When you wants to create general and reinforcement drawings from a single Cutting Plane, you can copy the cut view from Drafter and then turn off Rebar and create a general drawing through this function.

Details of Functions

Generate Drawing > Rebar On/Off

This can be done with the REBARONOFF (ROF) command or with Rebar On/Off in the Generate Drawing menu.

Run in the order of: run Rebar On/Off command → Select View → Select Setting Option (Toggle is default).

  • Object Setting [Show(S) / Hide(H) / Toggle(T)] : If Show is selected, the rebar is turned ON. Select Hide to turn it off. If you select Toggle, it turns OFF the rebar if it is ON, and ON if it is OFF.

  • No labels