Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Summary

  • This function provides the ability to print earthwork volume calculations and Summary tables in Excel based on the earthwork quantity table created in the create cross-section view function.
    Additionally, when calculating the earthwork quantity, a function is provided to exclude earthwork deduction sections, such as bridge or tunnel sections, from the earthwork quantity by entering them.

 

How to Run

[CIM View Mode]

  • Ribbon Menu > [INFRA-DESIGN] Tab > Cross Section View > Calculate the Area of Cross Section View [EVC]

 

Explanation

How to use Calculate the Area of Cross Section View.

Run the Calculate the Area of Cross Section View [EVC] command or execute the Calculate the Area of Cross Section View function in the Cross Section View of the INFRA-DESIGN menu tab.

Calculate the Area of Cross Section View, Shortcut key : EVC

Commentary contents

image-20240709-060117.png

  • [Command]
    Execute Calculate the Area of Cross Section View from the tree menu or enter the shortcut key EVC in the command window.

image-20240709-060208.png

Option to select Layout

  • Select Layout :
    Select the layout from which to calculate the earthwork quantity.
    The start point, end point, and length information below are automatically entered based on linear information.

image-20240709-060218.png

This is an option to enter bridge and tunnel segments to be excluded from earthwork quantity calculation.

  • Name : Enter a name for the bridge or tunnel segment.

  • Start Point : Enter the start point of the bridge or tunnel segment to be excluded from earthwork quantity calculation.

  • End Point : Enter the end point of the bridge or tunnel segment to be excluded from earthwork quantity calculation.

  • Length : It is automatically calculated based on the entered start and end point information.

  • Additional Segment List : You can check the list of added bridge and tunnel segments in this table.

image-20240709-060228.png

Additional setup options

  • Earth Work Conversion Factor :
    Cutting quantity requires a volume conversion factor because the volume in compacted state must be entered in the earthwork quantity table.

image-20240709-060240.png

Export Results

  • Create Earth Work Calculation :
    Export an Excel file consisting of [cover + earthwork volume summary table + earthwork volume detailed calculation information].

  • Create Earth Work Summary Table :
    Export the SUM of each item of earthwork volume detail properties.

https://www.youtube.com/watch?v=Hn44crIpQTA&list=PLeBRYyDYcCrffLQLcF52qGKHz2vFWvyT_&index=10

Video using the Calculate the Area of Cross Section View function
The Calculate the Area of Cross Section View function can be checked from 04:50~06:05.

  • No labels