Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Summary

  • The Rebar Group Setting is a feature that selects and expresses only the main rebars among the grouped rebars.

 

How to Run

[CIM View Mode]

  • Ribbon Menu > [INFRA-DESIGN] Tab> Rebar Group Setting [RG] / Delete Rebar Group Setting [DRG]

image-20240624-020924.png

Explanation

How to Rebar Group Setting

After executing the Rebar Group Setting command, set the main rebar of the group in the order shown in the figure above.
This setting takes precedence over the Group Rebar Type setting of Rebar Style.

Rebar Group Setting, Shortcut key : RG

Commentary contents

image-20240624-022319.png

  • [Command]
    Execute rebar group setting from the tree menu or enter the shortcut key RG in the command window.

image-20240624-022330.png

  • [Command]

    • Select group object :
      Select representative Rebar or [Undo(U)] :
      (lightbulb) Select a grouped rebar group.

image-20240624-022340.png

  • Command]

    • Select representative Rebar or [Undo(U)] :
      Entity in set : **
      (lightbulb) Select only the rebars to be represented in the section.

image-20240624-022345.png

  • [Command]

    • Select representative Rebar or [Undo(U)] :
      Entity in set : **
      Select representative Rebar or [Undo(U)] :
      (lightbulb) Among the grouped rebars, only the representative rebars are displayed.

image-20240624-022140.png

[Command]

  • Rebar Group Setting complete.

After rebar group setting, the settings are initialized when the selected rebar is updated due to a model change, the location changes, or the relevant rebar is deleted.

INFRA-DESIGN > Style > Delete Rebar Group Setting

Delete the main rebar designation setting.

  • Object : Deletes only the settings of the selected rebar object.

  • View : Deletes the main rebar settings of all rebar objects belonging to the selected view.

  • All : Deletes the main rebar settings of all rebar objects in the current workspace (based on the Tab shown above).

  • No labels