Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Summary

  • Create automatic dimensions for section views.

 

How to Run

[CIM View Mode]

  • Ribbon Menu > [INFRA-DESIGN] Tab> Dimension> View Auto Dimension

 

Explanation

How to create view auto dimensions when in CIM

When setting up a CIM section, dimensions are automatically created in the section view.

CIM - Auto Dimension (CAD ID)

Commentary contents

 

image-20240509-044257.png

 

 

  • [How to Run]
    When create a 2D cross section using By Plane in CIM, you can immediately create and check dimensions on the 2D cross section by applying the Auto Dimension (CAD ID) option.

 

image-20240529-234153.png

 

 

  • [Command]

    • View auto dimensions complete.
      (blue star) View auto dimensions can only be applied to Member (Concrete, Steel)
      objects when creating a 2D section using By Plane.

 

image-20240509-044841.pngimage-20240509-044900.png

 

 

  • [Modify]

    • The Modify environment for applying the Auto Dimension (CAD ID) option
      can be found in the Worktree > Data Tab > Drawing View > By Plane list.

How to create view auto dimension in CAD ID (View Auto Dimension, VD)

Automatically creates dimensions in section views.

View Auto Dimension, Shot Key : VD

Commentary contents

 

image-20240529-234353.png

 

  • [How to Run]
    Run View Auto Dimension from the tree menu or ViewAutoDimension (VD) from the Command window.

 

  • Creation of relevant dimensions is supported only for sections linked to CIM. (CIM View Mode Only)

 

image-20240529-234412.png

 

 

  • [Command]

    • Select view objects to create dimension :
      (lightbulb) Select the section view for which you want to create dimensions.

 

 

image-20240529-234433.png

 

  • [Command]

    • Please [Set (S)] or [Create (N)] the dimension. <N>
      (lightbulb) If no additional setup steps are required, click Enter or Space Bar to create the dimension.

 

image-20240529-234450.png

 

  • [Command]

    • Create to View auto dimensions complete.

 

image-20240529-234528.png

 

Option settings

  • [Command]

    • Please [Set (S)] or [Create (N)] the dimension. : S
      (blue star) Set the dimensions using the settings options.

    • Set reference axis movement for dimension creation
      When you run Settings, a crosshair will appear in the section view.
      Based on the center of the crosshair, the range to be expressed as dimensions in the four directions - upper, bottom, left, and right - is specified, and the center of the crosshair can be moved according to option settings.

      image-20240509-033037.png

 

image-20240529-234935.png

Option settings

  • [Command]

    • Please [Set (S)] or [Create (N)] the dimension. : S
      (blue star) Set the dimensions using the settings options.

    • Select objects for creating internal dimensions
      For parts that require dimension marking outside of the closed area, such as hollow sections inside the structure, select the object and mark the dimension.

      image-20240529-234956.png

    • Dimension notation result

      image-20240529-235054.png

Reference Materials

  •  

  • No labels