Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Feature Summary

Rebar Group Setting [Shortcut command: RG]

Delete Rebar Group Setting [Shortcut command: DRG]

The Rebar Group Setting is a feature that selects and expresses only the main rebars among the grouped rebars.

Feature Explanation

Generate Drawing > Style > Rebar Group Setting

  • After executing the Rebar Group Setting command, set the main rebar of the group in the order shown in the figure above. This setting takes precedence over the Group Rebar Type setting of Rebar Style.

Assuming that the position of the main rebar is the 10th in the rebar group, if the number of rebars becomes less than 10 through the model update, the settings are reset.

Generate Drawing > Style > Delete Rebar Group Setting

Delete the main rebar designation setting.

  • Object: Deletes only the settings of the selected rebar object.

  • View: Deletes the main rebar settings of all rebar objects belonging to the selected view.

  • All: Deletes the main rebar settings of all rebar objects in the current workspace (based on the Tab shown above).

  • No labels