Feature Summary
[Shortcut Command : RST]
Feature to set the expression style of the rebar. Through this setting, the user can turn on/off the expression in the visible range of line or point type rebars, and also set various expression methods such as double line, single line, fill, and layer.
Feature Explanation
Generate Drawing > Style > Rebar Style
General Tab
Show Point Type Rebar in Visible Range : If the cut section and the rebar are not positioned vertically as shown in the figure below, the section cut by the visible range is expressed as a point, and the rebar included in the visible range is expressed as a line. If this option is turned off, only points are displayed in the visible range of the relevant rebar without expressing the lines.
Show Line Type Rebar in Visible Range: Among the rebars that do not intersect the cutting surface of the Cutting Box, the rebars in the Cutting Box are expressed in the form of a line. If this option is turned off, the line type rebars expressed within the visible range are not displayed. In this case, only rebars that are on the same plane as the cutting plane of the Cutting Box are displayed.
Group Rebar Type: Set the expression method of rebars arranged in groups. If All is selected, all group rebars are displayed. If the user selects First, only the first rebars in the group are displayed. If the user selects Last, only the last rebars in the group are displayed. If the user selects First and Last, only the two rebars at the beginning and end of the group are displayed. If the user selects Center, only the rebars in the center of the group are displayed. If the user wants to display only the selected rebar in the group, the user can display only the selected rebar through the Generate Drawing > Style > Rebar Group Setting feature.
Point Type Rebar: Set the expression method of the Point Type rebar. Select Outline to display it in the form of a hollow circle. Select Filled Circle to express the point rebar as a circle filled with the color according to the setting of the Pattern Tap. Select Circle by 3 Layers to express it as three circles that gradually become smaller.
Line Type Rebar: Set the expression method of the Line Type rebar. Select Single Line, to display rebars as a single line. Select Double Line to display rebars as double lines reflecting the actual thickness of the rebars that are not filled with a Pattern. Select Double Line with Center Line to display rebars as double lines along with the center line of the rebars. Select Filled Double Line with Center Line to display rebars of the filled double line with the center line.
Splice Symbol : Sets the method of displaying splices when there are splices in Line Type rebars.
Use Rebar Color and Layer by Diameter: Used to specify the color of the rebar for each rebar diameter. The user can use custom colors or random colors.
Line Style Tab
Line Type Rebar : Defines the line color, line style, and layer of the Line Type rebar.
Point Type Rebar: Defines the line color, line style, and layer of the Point Type rebar.
Visible Range Line Type Rebar : Defines the line color, line style, and layer of the Line Type rebar included in the visible range.
Visible Range Point Type Rebar : Defines the line color, line style, and layer of the Point Type rebar included in the visible range.
Rebar Center: Set the color of the center line of the rebar.
Pattern Tab
Line Type Rebar: Set the fill color and layer of the line type rebar.
Point Type Rebar : Set the fill color and layer of the point type rebar.