Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Feature Summary

[Shortcut Command : TAM]

This is a function to set the display style of Tendon annotations.

Feature Explanation

Generate Drawing > Style > Tendon Annotation Style

Tendon Annotation Style Dialog Configuration

Field Code Area

The user can check and insert the necessary field codes required to display information from CIM in the annotations. Field code is used to set the type of comment information to be displayed in the comment. Set the annotation style by freely arranging the Tendon information the user wants to put in the Text1, 2, and 3 areas.

  • Unit: Below the field code table, the user can set the unit for each field code. Information is imported from the CIM model and displayed according to the unit value set here.

  • Precision: Set the precision of the information value obtained from the CIM model.

  • Frame: Insert a frame for each individual value in the text area. After selecting the desired shape, use the Add button to insert the code for entering the shape in the text area. If the user puts a value between the inserted codes, the value is expressed by putting it in the shape.

Text and Arrow Style Setting Area

Set the text of the annotation through the field code along with the text that the user wants to display, and set the arrow and display method for each type of Tendon annotation.

Text Tab

Specifies the format to be displayed for Text. The Text area is divided into 3, Text1, Text2, and Text 3, and each text area can be placed at the desired location.

  • Font setting: Set the Text Font of Text1, Text2, and Text3.

  • Color & Scale Setting: Set the color of the annotation text and set the view magnification of the Preview.

  • Full Frame: Covers the entire Text1 area.

  • Vertical Align: Set the vertical alignment position of the Text1 area. (The vertical position of Text1 cannot be changed. Only the areas of Text2 and Text3 can change the vertical alignment position.)

  • Horizontal Align: Set the horizontal alignment position of the Text1 area. (The horizontal position of Text1 cannot be changed. Only the areas of Text2 and 3 can change the horizontal alignment position.)

Line Type Tendon Tab

Sets the annotation style for the Tendon expressed as a line on the Cutting View.

  • Leader Type: Set the direction of the Tendon annotation leader. When set to Vertical, the leader extends vertically from the Tendon object, and when Diagonal is selected, it extends diagonally.

  • Leader Head Type: Select the shape of the leader’s head, such as the arrow, blank arrow, circle, or diagonal line.

  • Leader Length: Set the default length of the leader line.

  • Offset from Origin: Sets the offset from the Tendon object indicating the position of the text when setting annotations without support lines.

  • Horizontal Text: Text is always displayed in the horizontal direction on the screen where it is viewed.

  • Vertical Text: Text is always displayed in the vertical direction on the screen where it is viewed.

  • User direction: Text is displayed according to the angle specified by the user.

  • Left - Right Text Direction: Makes sure that the text area is always aligned from left to right. If this option is cleared, the text position is mirrored in the direction of the annotation.

Section Type Tendon Tab

Sets the annotation style for Tendons expressed as dots on the Cutting View.

  • Leader Type: Set the direction of the Tendon annotation leader. When set to Vertical, the leader extends vertically from the Tendon object, and when Diagonal is selected, it extends diagonally.

  • Leader Head Type: Select the shape of the leader’s head, such as the arrow, blank arrow, circle, or diagonal line.

  • Leader Length: Set the default length of the leader line.

  • Offset from Origin: Sets the offset from the Tendon object indicating the position of the text when setting annotations without support lines.

  • Leader Scale: Sets the scale of the leader arrowhead.

  • Horizontal Text: Text is always displayed in the horizontal direction on the screen where it is viewed.

  • Vertical Text: Text is always displayed in the vertical direction on the screen where it is viewed.

  • User direction: Text is displayed according to the angle specified by the user.

  • Left - Right Text Direction: Makes sure that the text area is always aligned from left to right. If this option is cleared, the text position is mirrored in the direction of the annotation.

  • Text Align Center: Mark the annotation text at the center of the Tendon section without a leader line.

Color and Layer Tab

Set the support line color and layer of the annotation.

  • Leader Color: Sets the color of the Tendon annotation leader.

  • Annotation Layer: Sets the Tendon annotation layer.

Preview Area

The user can check the set Style in advance through the preview.

  • No labels