Select Layout : You can choose Layout. All cross sections included in the selected layout are selected, and the starting point, end point, and total length are automatically calculated based on the selected layout information.

Select Cross Section : When selected, the Picker button is activated, and you can select a cross section with the Picker button.

Table category settings : You can check the field items and field codes in the Earthwork qantity table. You can use the table provided by default, or you can import your own DWG block using ‘Import Block’ to customize the table.

Table content settings

• Same as table style : Selecting this item will use the same settings as ‘Table category settings’.

• layer : Select a layer in the Earthwork qantity table.

• Font : Select a font from the Earthwork qantity table.

• Arrangement : Choose where to align the text in the Earthwork qantity table.

• Accuracy : Select the number of decimal places to display for each item.

Create Bench Cut : Select whether to create Bench Cut.

Bench Cut Height : Enter the Bench Cut vertical height.

Minimum Height : If the height of the last bench cut is less than the minimum height, the bench cut is not performed and the drawing is continued from the previous bench cut.

Drainage Slope : Enter the horizontal slope of the drainage.

Exception Slope : Positions below the entered slope value are excluded from layer picking.

Setting

• Layer : Select the Bench Cut layer.

• Hidden Line Scale : Select whether to apply hidden lines to Bench Cut.

• Apply Stone Filled Drain to Cut and Fill boundary : Select whether to apply Stone Filled Drain to the Cut and Fill boundary. There are two types of application

• Creating Method

  • Nomal : Bench cut is performed without considering the distinction between subgrade and embankement

  • Cut and Fill Boundaries : There is no bench cut above the distinction between subgrade and embankement, but continues below the pave.

Slpoe Notation : Select whether or not to display Slpoe Notation.

Slope Text

• Layer : Select the slope text layer.

• Font : Select the slope text font.

Create Wipeout in Earth Work Qantity Table : Earthwork Qantity Table wipeout option On/Off